cambio ip da consolle

[robertoSEA]

Proxmox su un server hp. inizialmente ho impostato un indirizzo ip tale da poterlo raggiungere dalla mia rete.
ora il server è stato spostato in un datacenter dove riesco ad accedere solo mezzo vpn. l'indirizzo che mi viene rilasciato dalla VPN non è della stessa classe di indirizzi con cui si raggiunge il server. attualmente riesco a raggiungerlo tramite console ILO, compreso ho disponibile solo comandi da console; purtroppo sono a zero di linux; vorrei cambiare l'indirizzo di proxmox usare comandi da console. potete gentilmente aiutarmi suggerendomi da lanciare per cambiare scelto da console?
grazie mille roberto

 

[t.lamprecht]

Ciao, we currently only support English and German as forum languages, I'm afraid.


To change the IP you can edit the /etc/network/interfaces and the /etc/hosts file.
(a cambiare l'indirizzo di Proxmox VE devi editare i files /etc/network/interfaces e /etc/hosts)

You can open them with an commandline editor like nano, it desribes most useful available commands in the bottom line (the symbol ^ means CTRL, so CTRL + X is save) :

nano /etc/network/interfaces

Here scroll down to the vmbr0 section and change the address, netmask and gateway to the new values.
(apri il primo file con nano, cerci vmbr0 e cambia l'indirizzo, salva con CTRL + X)

Then you also need to adapt the address for the local nodename (hostname) in /etc/hosts to match the new address.
(cambia anche l'indirizzo in /etc/hosts con nano)

Then you should be able to do:

ifdown vmbr0
ifup vmbr0

(esegui i comandi disopra per attivare il cambiamento)

check with

ip -c addr

if the IP is configured.
Post any output or change you would made if you're unsure, and we can check it out.

Hope this helps

 

[robertoSEA]

hello i have a similar problem now.
i have installed proxmon on a pc, and during the installation i have chosen a dhcp address.
at the server logon is showed that for connecting to proxmon i have to use: https://192.168.28.25:8006/ where the ip came from the dhcp server, rightly.
now i have changed the ip, because i want to have a static ip.
i have done it in two different ways:
first from proxmox web interface,
after directly from the console editing by nano, the file nano /etc/network/interfaces.
the new static ip is 192.168.28.162 and i can reach the console by this url rightly, but the console monitor shows the old ip for connecting to the console, and obviously doesn't it doesn't work

 

[t.lamprecht]

Hi,

did you also changed it in /etc/hosts for the nodenames host entry?

 

[robertoSEA]

no non l'avevo fatto
grazie mille per il supporto