Hi 
Another important problem in my 2-Node Cluster configuration. I have 2 bonds, one for the storage network and on for LAN. In the LAN i have the vlan 78, there is my fence device (APC Switched RACK PDU). So my LAN configuration is like that:
auto bond0
iface bond0 inet manual
slaves eth1 eth5
bond_miimon 100
bond_mode active-backup
auto bond0.78
iface bond0.78 inet static
address 192.168.78.xx
netmask 255.255.255.0
broadcast 192.168.78.255
vlan-raw-device bond0
auto vmbr0
iface vmbr0 inet static
address 192.168.xx.xx
netmask 255.255.255.0
gateway 192.168.xx.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
Now it's not possible to reach the VLAN 78 when both bond devices are plugged. If i remove the cable from the second nic i can ping the fence device. Same on the second server, just the first nic can reach the subnet. I have no ideas why. Does someone know the problem, can someone help?
Thanks in advance,
Jan D
Another important problem in my 2-Node Cluster configuration. I have 2 bonds, one for the storage network and on for LAN. In the LAN i have the vlan 78, there is my fence device (APC Switched RACK PDU). So my LAN configuration is like that:
auto bond0
iface bond0 inet manual
slaves eth1 eth5
bond_miimon 100
bond_mode active-backup
auto bond0.78
iface bond0.78 inet static
address 192.168.78.xx
netmask 255.255.255.0
broadcast 192.168.78.255
vlan-raw-device bond0
auto vmbr0
iface vmbr0 inet static
address 192.168.xx.xx
netmask 255.255.255.0
gateway 192.168.xx.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
Now it's not possible to reach the VLAN 78 when both bond devices are plugged. If i remove the cable from the second nic i can ping the fence device. Same on the second server, just the first nic can reach the subnet. I have no ideas why. Does someone know the problem, can someone help?
Thanks in advance,
Jan D
