I've been trying to get PVE installed on a couple of Intel NUCs (NUC7i7DNKE), and I've been unable to get the installer to come up no matter what method I try for booting the installation media image. So far, I've tried the following, all with the same result.
The Openbox-Message: Unable to find a valid menu file "/var/lib/openbox/debian-menu.xml" jumps out as the only potential issue. The only relevant thread that I could find is from 2012 and didn't provide any sort of solution.
Is there a way to better diagnose this, or even a CLI installer that I can use?
- PXE boot using netboot.xyz
- USB boot using Ventoy
- USB boot using a drive written with Balena Etcher
Code:
x. Org X Server 1.20.11
X Protocol Version 11, Revision 0
Build Operating System: linux Debian
Current Operating System: Linux proxmox 5.15. 74-1-pve #1 SMP PVE 5.15.74-1 (Mon, 14 Nov 2022 20:17:15 +0100) ×86_64
Kernel command line: vmlinuz vga=791 videosvesafb: yurap, mtrr ramdisk_size=16777216 w quiet splash-silent initrd-initrd. magic
Build Date: 11 November 2022 12:37:52PM
xorg-server 2:1.20.11-1+deb11u3 (https: //www.debian.org/support)
Current version of pixman: 0.40.0
Before reporting problems, check http://wiki.x.org to make sure that you have the latest version.
Markers: (--) probed, (x) from config file, (=-) default setting, config file,
(++) from command line, (II) informational,
(HW) warning, (EE) error, (NI) not implemented, , (??) unknoun.
(==) Log file: "/var/log/Xorg.0. log"
Time: Fri Jan 13 18:25:43 2023
(==) Using system config directory "/us/share/X11/xorg.conf .d"
(II) modeset (0): Initializing kms color map for depth 24, 8 bpc.
Openbox-Message: Unable to find a valid menu file "/var/lib/openbox/debian-menu.xml"
trying to detect country...
detected country: US
found DiskO N:/dev/nvme0n1
found Disk1 N: /dev/sda found
Disk2 N:/dev/sdb
Could not determine the accessibility bus address
(II) AIGLX: Suspending AIGLX clients for VT switch
(IT) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Suspending AIGLX clients for VT switchThe Openbox-Message: Unable to find a valid menu file "/var/lib/openbox/debian-menu.xml" jumps out as the only potential issue. The only relevant thread that I could find is from 2012 and didn't provide any sort of solution.
Is there a way to better diagnose this, or even a CLI installer that I can use?
Attachments
Last edited:
