Super Micro H8SGL-F using AMD 6276 and Proxmox 4.4 only shows as a single core, even though Memtest shows 16. It runs Proxmox 4.4, but what gives? Anybody?
AMD 6276 Shows Only 1 CPU
- Thread starter kjameson
- Start date
Unless I am missing something, here! Thanks for responding! I swapped with a second processor! Memtest show good processor(s), but Proxmox only shows 1 core, 1 processor! What a bummer! I hope that I am missing something! That means that all VMs can have a max of 1 core, 1 processor! Thanks, Tom ... bt/w ... the final version 5.0 loads immediately (see my Super Micro H8SGL-F post) .... great software! Gonna' load version 5.0 final on the machine that has the AMD 6276 processor in the next few days ,,, if AMD 6276 still shows a single core ... gonna' go back to an AMD 6128 ... they all show 8 cores. I do appreciate any help!
Loaded Version 5.0 Final tonight ... no love ... have another 6128 on order! I fail to understand. I've tried more than one 6276 ... barely runs ... only a couple of simple VMs! Film at eleven.
Does this indicate a "flaw in the slaw"? Don't have Ubuntu 17.04. handy ... will follow up ... out of ideas!
Thanks!
Thanks!
Shows same thing ... ... kernel linux ubuntu 4.10.8-19 generic Ubuntu SMP ...shows single core ... single socket! Debian 8 shows same ... Memtest 386 shows correct ... and cpu runs Proxmox 5.0 ... How to find a "correct" kernel for Proxmox 5.0? Help!
Last edited:
Thanks for all the thoughts ... here's the deal! Clear the bios! On this board ... 1. Remove power 2. Remove bios battery ... 4. Short bios battery holder "+" & "-" leads together for a few seconds ... 5. Put it all back together ... Power up & reboot computer ... Lo & behold, it works! Dmesg showed that SNP Motherboard is not recognized ... shows 12 cores, now! Thanks to all ... especially Mike at Super Micro technical support ...