Adding second network card to proxmox

[Stanley999]

Hi.
I installed Proxmox 7.2-3 with one network card installed. I decided to add second card and Proxmox see this card but i dont know how to add it to proxmox interface.

H/W path Device Class Description ======================================================= /0/100/a/0 enp63s0 network NetXtreme BCM5761 Gigabit Ethernet PCIe /0/100/14.4/0 network RTL-8100/8101L/8139 PCI Fast Ethernet Adapter /1 vmbr0 network Ethernet interface

 

[fabian]

you can configure it over the GUI (select the node, then "network")

 

[LnxBil]

I decided to add second card and Proxmox see this card but i dont know how to add it to proxmox interface.

That also depends on what you want to do. What are your goals?

 

[Stanley999]

the problem is i cant add it from GUI because my network card in section Device name is empty. In GUI section Bridge Ports i have to put this device name.

 

[fabian]

is it listed in ip link? what about /proc/net/dev? any errors in the journal relating to it?