Figured it out.
Here is fdisk -l
proxmox:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 1 66 524288 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 66 9729 77623872 8e Linux LVM
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xd53698cb
Device Boot Start End Blocks Id System
/dev/sdb1 1 9730 78148608 7 HPFS/NTFS
Disk /dev/dm-0: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 19.8 GB, 19864223744 bytes
255 heads, 63 sectors/track, 2415 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-1 doesn't contain a valid partition table
Disk /dev/dm-2: 51.0 GB, 51036291072 bytes
255 heads, 63 sectors/track, 6204 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-2 doesn't contain a valid partition table
And pveversion -v
proxmox:~# pveversion -v
pve-manager: 1.8-15 (pve-manager/1.8/5754)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.8-32
pve-kernel-2.6.32-4-pve: 2.6.32-32
qemu-server: 1.1-30
pve-firmware: 1.0-11
libpve-storage-perl: 1.0-16
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-11
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.14.0-2
ksm-control-daemon: 1.0-5
proxmox:~#