10G FIbre NIC Card port Flapping , bnx2x Driver issue

[phoneme]

Hi I have got my 10Gbe NetXtreme Card port Flapping problem

/var/logmessages

root@pve3:/usr/src# tail -f /var/log/messages
Jun 30 23:35:09 pve3 kernel: [195754.031803] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:09 pve3 kernel: [195754.239819] bond1: (slave ens1f0): link status definitely down, disabling slave
Jun 30 23:35:10 pve3 kernel: [195755.071809] bond1: (slave ens1f1): link status definitely down, disabling slave
Jun 30 23:35:10 pve3 kernel: [195755.071821] bond1: now running without any active interface!
Jun 30 23:35:10 pve3 kernel: [195755.159937] bnx2x 0000:08:00.0 ens1f0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:10 pve3 kernel: [195755.175814] bond1: (slave ens1f0): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:10 pve3 kernel: [195755.175826] bond1: active interface up!
Jun 30 23:35:11 pve3 kernel: [195755.991965] bnx2x 0000:08:00.1 ens1f1: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:11 pve3 kernel: [195756.007809] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:11 pve3 kernel: [195756.223787] bond1: (slave ens1f0): link status definitely down, disabling slave
Jun 30 23:35:12 pve3 kernel: [195757.055813] bond1: (slave ens1f1): link status definitely down, disabling slave
Jun 30 23:35:12 pve3 kernel: [195757.055823] bond1: now running without any active interface!
Jun 30 23:35:12 pve3 kernel: [195757.207967] bnx2x 0000:08:00.0 ens1f0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:12 pve3 kernel: [195757.263814] bond1: (slave ens1f0): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:12 pve3 kernel: [195757.263823] bond1: active interface up!
Jun 30 23:35:13 pve3 kernel: [195758.039964] bnx2x 0000:08:00.1 ens1f1: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:13 pve3 kernel: [195758.095813] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:13 pve3 kernel: [195758.303801] bond1: (slave ens1f0): link status definitely down, disabling slave


root@pve3:/usr/src# ethtool -i ens1f0
driver: bnx2x
version: 1.713.36-0 storm 7.13.11.0
firmware-version: bc 7.4.22
expansion-rom-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

 

[wolfgang]

Hi,

are your Proxmox VE updated?
Which version do you use?

What bond mode do you use?
Is the transceiver compatible with this NIC?
What NIC model is this?