10G FIbre NIC Card port Flapping , bnx2x Driver issue

May 19, 2020
5
0
1
25
Hi I have got my 10Gbe NetXtreme Card port Flapping problem

/var/logmessages

root@pve3:/usr/src# tail -f /var/log/messages
Jun 30 23:35:09 pve3 kernel: [195754.031803] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:09 pve3 kernel: [195754.239819] bond1: (slave ens1f0): link status definitely down, disabling slave
Jun 30 23:35:10 pve3 kernel: [195755.071809] bond1: (slave ens1f1): link status definitely down, disabling slave
Jun 30 23:35:10 pve3 kernel: [195755.071821] bond1: now running without any active interface!
Jun 30 23:35:10 pve3 kernel: [195755.159937] bnx2x 0000:08:00.0 ens1f0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:10 pve3 kernel: [195755.175814] bond1: (slave ens1f0): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:10 pve3 kernel: [195755.175826] bond1: active interface up!
Jun 30 23:35:11 pve3 kernel: [195755.991965] bnx2x 0000:08:00.1 ens1f1: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:11 pve3 kernel: [195756.007809] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:11 pve3 kernel: [195756.223787] bond1: (slave ens1f0): link status definitely down, disabling slave
Jun 30 23:35:12 pve3 kernel: [195757.055813] bond1: (slave ens1f1): link status definitely down, disabling slave
Jun 30 23:35:12 pve3 kernel: [195757.055823] bond1: now running without any active interface!
Jun 30 23:35:12 pve3 kernel: [195757.207967] bnx2x 0000:08:00.0 ens1f0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:12 pve3 kernel: [195757.263814] bond1: (slave ens1f0): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:12 pve3 kernel: [195757.263823] bond1: active interface up!
Jun 30 23:35:13 pve3 kernel: [195758.039964] bnx2x 0000:08:00.1 ens1f1: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:13 pve3 kernel: [195758.095813] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:13 pve3 kernel: [195758.303801] bond1: (slave ens1f0): link status definitely down, disabling slave


root@pve3:/usr/src# ethtool -i ens1f0
driver: bnx2x
version: 1.713.36-0 storm 7.13.11.0
firmware-version: bc 7.4.22
expansion-rom-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!