10G FIbre NIC Card port Flapping , bnx2x Driver issue

P

phoneme

New Member
May 19, 2020
10
0
1
30
Hi I have got my 10Gbe NetXtreme Card port Flapping problem

/var/logmessages

root@pve3:/usr/src# tail -f /var/log/messages
Jun 30 23:35:09 pve3 kernel: [195754.031803] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:09 pve3 kernel: [195754.239819] bond1: (slave ens1f0): link status definitely down, disabling slave
Jun 30 23:35:10 pve3 kernel: [195755.071809] bond1: (slave ens1f1): link status definitely down, disabling slave
Jun 30 23:35:10 pve3 kernel: [195755.071821] bond1: now running without any active interface!
Jun 30 23:35:10 pve3 kernel: [195755.159937] bnx2x 0000:08:00.0 ens1f0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:10 pve3 kernel: [195755.175814] bond1: (slave ens1f0): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:10 pve3 kernel: [195755.175826] bond1: active interface up!
Jun 30 23:35:11 pve3 kernel: [195755.991965] bnx2x 0000:08:00.1 ens1f1: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:11 pve3 kernel: [195756.007809] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:11 pve3 kernel: [195756.223787] bond1: (slave ens1f0): link status definitely down, disabling slave
Jun 30 23:35:12 pve3 kernel: [195757.055813] bond1: (slave ens1f1): link status definitely down, disabling slave
Jun 30 23:35:12 pve3 kernel: [195757.055823] bond1: now running without any active interface!
Jun 30 23:35:12 pve3 kernel: [195757.207967] bnx2x 0000:08:00.0 ens1f0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:12 pve3 kernel: [195757.263814] bond1: (slave ens1f0): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:12 pve3 kernel: [195757.263823] bond1: active interface up!
Jun 30 23:35:13 pve3 kernel: [195758.039964] bnx2x 0000:08:00.1 ens1f1: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
Jun 30 23:35:13 pve3 kernel: [195758.095813] bond1: (slave ens1f1): link status definitely up, 10000 Mbps full duplex
Jun 30 23:35:13 pve3 kernel: [195758.303801] bond1: (slave ens1f0): link status definitely down, disabling slave


root@pve3:/usr/src# ethtool -i ens1f0
driver: bnx2x
version: 1.713.36-0 storm 7.13.11.0
firmware-version: bc 7.4.22
expansion-rom-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
 
Hi,

are your Proxmox VE updated?
Which version do you use?

What bond mode do you use?
Is the transceiver compatible with this NIC?
What NIC model is this?
 
You must log in or register to reply here.
Top Bottom