truenas

Hello, I'm having some trouble adding a root folder to my Radarr lxc instance. Currently, I have a truenas instance running in its own VM with an NFS share called 'media'. In my proxmox host, I mounted the NFS share as 'truenas-media' and created a group 'media-group'. I gave 'media-group' (with...

Hello, I have created a Proxmox VM via truenas-iso and then used Proxmox/Hardware/add-usb to pass my two USB SSD hard drives to the TrueNAS VM. But now I have the problem that I can no longer find the pool I created in TrueNas. Presumably this is due to my method ??? How would you proceed so...

I bought a ZimaCube Pro from IceWhale as it seemed a pretty good deal for 6 SATA drives and 4 NVME drives + 1 NVME boot drive and 10Gbe. I am trying to move from an old Dell R720 that is just too loud, too power hungry, and can't transcode without dedicated gpu, which increases loudness and...

Hi all, I am configuring my homelab/NAS device and need a sanity check and some advice. This is my current HW setup Motherboard: MSI X570S PG Riptide CPU: AMD 5700X SSD: 2TB NVME on M2_1 RAM: 48GB 2666Mhz ECC HDD: 4x Seagate 10TB directly connected to the SATA controller GPU: 2x RTX A4000 NIC...

Hello all, I get errors with PVE v7 & v8 when I use NFS (TrueNAS) to back up any LXC instances. I do not get errors with VMs. When I enable SMB shares on the same NFS sharepoint, LXCs will backup without error. Does anyone have any insight into this issue? ERROR: Backup of VM 303 failed -...

Hi again, I am still tinkering with the project of a TrueNAS VM on PVE 8.1.4. using a HP DL380 G10 with a PCIe/NVMe/U2 riser card and cage. I already posted here with not much success before getting some more info at the TrueNAS forums over here. It turned out that some people there would...

I have been envisioning a move from my own kvm ubuntu setup to proxmox. I currently have the vm images already on a seperate storage (truenas underlying 15min snapshotted zvol) with is mounted via iscsi as block device and formatted to ext4 which is housing the raw img files for kvm (to restore...

Hello, Today I have installed Proxmox on my old PC that is no longer being used, I was watching a tutorial about how to install TRUENAS in here https://www.youtube.com/watch?v=_sfddZHhOj4 and at 18:00 minute timestamp in that video ran to a problem. I have enabled the IOMMU in the console and...

Heyho, zu erst zu meinem Setup: Ich habe mich vor einigen Tagen entschieden die meisten Backups auf ein Dataset meines TrueNAS-Scale Servers zu speichern. Hierzu habe ich einen SMB Share in meinen Datacenter eingebunden. Da das einbinden eines weiteren smb Share probleme bereitet hat, habe ich...

Hey all! Long time "Googler", first time poster. So I'm sure there are tons of threads I'm sure. However, let me tell you the story as short as I can. I had the scare of my life when my sas drive (that came with the used hardware I bought a couple years back) died last night. Now, I'm not 100%...

Build: Motherboard: Asus Rog Zenith Extreme Alpha X399 CPU: Ryzen Threadripper 2970wx (24 Core, 4.2GHz) GPU: 2080 (this is the one I'm attempting to passthrough to the VM) Second GPU: Radeon Pro WX2100 RAM: 128GB Dominator Platinum DDR4 3200Mhz (8 sticks) HBA: LSI SAS 9300-16i Hard Drives...

Setup Overview: I have a server running Proxmox on a Dell R730, equipped with an Intel GbE 4P I350-t network card. This card has four network ports, which are configured as follows: Port 1: Connected to my ISP, providing internet access to the Proxmox server via a pfSense VM. Port 2: Used...

Hey, Just built a small home lab and I'm new to Proxmox VE. I have 3 SSDs in my small server (with 8 GB RAM, will upgrade to 16GB eventually). 1x 256GB SSD (on a slow SATA3 port) 2x 1TB SSD (both on a faster SATA6 port) One of the VMs is going to be a TrueNAS and the other one using docker...

Hello I have configured classic iSCSI with LVM but no thin provisioning for me is a deal breaker, so i want to configure ZFS over iSCSI. On my PVE server i have two NICs that comunicates with my Truenas for iSCSI traffic. Each NIC is on its own network / vlan: PVE server iSCSI01 NIC: IP...

I'd like to know if I am running Proxmox using an NVME drive and if I am using an additional NVME drive (attached using PCIe adapter) as the storage device for VMs, can I pass through all of my SATA ports to Truenas? I know HBA card is an option but I want to know if there is any problem with...

when I launch a copy with Rsync from an internal Pool (RaidZ2) to an external Pool via a USB 3.1 port, after a while the TrueNAS VM crashes (shutdown). The copy speed can rise to 450 MB/s... If I restrict the Rsync speed to 300 Mb/s I don't crash any more! Do you have a solution to this...

We moved the hardware we had on-hand to Proxmox a year ago and now looking ahead to what's next (Fine tuning, improve reliability, and best practices). This is for a small business of around 10 users with a small amount of data (1.5 TB). The data is mostly spreadsheets, documents, and Access...

Hello, I have an up-to-date TrueNAS SCALE bare metal server running that I'm using to, among other things, store LXC templates and ISOs for Proxmox. I initially configured TrueNAS's NFS service to disable NFS v3, as I knew Proxmox supported v4.2 and that's what I wanted to use. However...

Hello All, I’m new to Proxmox but not virtualization, I’ve used VMWare in the past so I get the gist of it. I first installed Windows 11 as vm to make sure I knew what I was doing in Proxmox, Win 11 installed fine and I could see all 8x8GB drives so I knew my HBA card was working. My issue is...

Hello, I am new to proxmox and SMART. I setup automated SMART Tests, short tests run daily and Long tests run monthly. I got a couple emails from pve about the test this morning which I assume is from the LONG test... SMART error (SelfTest) detected on host: pve SMART error...