public ip

Good evening, I have been trying to create a specific network configuration for several days but keep encountering difficulties. Therefore, I would like to take this opportunity to ask the community for some input and assistance. I have a Hetzner server running Proxmox version 8.2.7. My previous...

I have been battling with this for over a month any configuration on my VM's does not seem to fix my issue. Below is the image of my network setup provided to me with a deployment of Proxmox from my dedicated server host. eno1 & eno2: These are my 10Gb connections bond0: eno1/eno2 bonded...

So for a backstory; I wasn't happy with tailscale because I put them on proxmox host and it made all websites inaccessible. So I decided to uninstall tailscale and purged anything that is leftover in network interfaces. Now that I am able to connect to the web gui as well as another websites...

Hello, I have a question. I have a proxmox and in it 2 separate containers: 200, 201. They have two differents ip 192.168.x.x. On container 200 there is a docker with traefik and a portainer to control and reverse proxy to my domain with DNS on cloudflare. On container 201 is a docker with...

Hello here. I hope to get a help with my setup. I'm trying to move one by one to keep the complexity handled. So far I have a cluster of three nodes (bare metal). Each node has only single NIC with assigned /29 network to it. So each node can have up to 5 IP addresses. They communicate over...

Hello, I'm a regular vmware user migrating to proxmox :) I'm new to proxmox and I haven't found an article that could answer my question, but if it exists I'd be happy to be redirected to it :) So, I've just bought a dedicated server from a datacenter - OVH, installed a proxmox on it and...

Hello everyone I need some help today regarding networking. Until now I had a working setup but now I have a new server which I want to share with someone. My configuration for myself as the solo user is as follows: auto lo iface lo inet loopback iface enp7s0 inet manual auto vmbr0 iface...

Hey everyone, this setup runs in a datacenter on a public IP 37.x.x.86/26. The server has got one physical interface eth0. The current setup works nicely with a masqueraded private subnet 10.10.10.0/24 and the single public IP. I now bought two additional IP adresses, because i need public IPs...

Hello, i hop you guys can i help me. Currently i have proxmox in the hetzner cloud on a root server. I have 3 Public IP-Adresses. 1. Public IP: 138.XXX.XXX.126 (Proxmox Interface) 2. Public IP: 138.XXX.XXX.96 (pfSense WAN -> LAN) 3. Public IP: 138.XXX.XXX.105 (pfSense WAN -> Mailserver) Hetzner...

Background I have a web app that I've been building and testing locally. I've deployed it to a server that I own, which is running here in my house. The server is connected via ethernet to my home router. I pay Xfinity for a normal residential plan, in which I have a single public IP...

Hello, I encounter an issue with the architecture I would like to setup for a non-profit association. The purpose of this association is to host nextcloud instance for other local association so they can move away from GAFAM. I've my own physical server with proxmox. I host it in a datacenter...

Hi Guys , i would like to get acces to local vm from outside exemple sub.domaine.com ==> proxmox-VM LOCAL-IP-3:80 , I made some config on my external apache proxy as you can see : EXTERNAL APACHE PROXY (Public IP -178.xx.xx.xx) : /etc/apache2/sites-available/...

So my situation/need is as follows: I have a proxmox server that is going to run 16 VMs. The first 8 VMs can run on my own network and have my public IP (with each their own portforwarding in my router for public access) The other 8 VMs need to use a different public IP, namely the IP at my...

Hey I'm currently setting up a server with proxmox and the problem is : we couldn't buy any public ip for the CT. I tried what I could to try and make this work but I can't quite figure out what I should put in IPv4/CIDR.

Hi, i have a dedicated server on ionos, i need to have an additional public ip to one of my virtual machines behind proxmox. The additional public ip for this scope are delivered via vlan 1010 the additional ip is 217.xxx.xxx.164 The gateway is the same 10.255.255.1 so i have do this: auto lo...

Hello, I have been trying to get this for a few days and decided to ask. I have a Proxmox 7.2 server on a machine in my house. My router has a public ip, let's assume 200.200.200.200 external and 192.168.86.1 internal. My goal is to access 200.200.200.200:443 from the internet and reach a...

Hi there! I'm just literally new to proxmox and I have been using it for a couple of days now. I bought a ProLiant DL360p Gen 8 to start and a TL-SF1005D to start running my home lab. I have been reading a lot about this topic on the forum, but I haven't really found anything clear about how to...

Hello fellow Proxmoxers!, I just have a quick question as I cant find an answer to it anywhere. I am trying to setup a machine with 4 IP Addresses to have 3 LXC containers each with their own Public IPV4 Address, but I cant seem to get the network config working. My current host network config...

I have a 12 node cluster, 6 at each of two location. Location one nodes use .2.0/24, the other .39.0/24 Nodes can all ping one another but when trying to create a ceph monitor on any node at the second location (.39) the error states: Multiple Ceph public networks detected on putsproxp07...

Hello my name is Jose, i am new using Proxmox. I have installed proxmox on a server and created 9 VM, however have problems running the network correctly, i have tried several settings that have found on Google but does not working correctly. The idea is to assign an public IP to each virtual...