proxmox 8.2.2

Greetings to all, I am seeking assistance with a challenging issue related to Ceph that has significantly impacted the company I work for. Our company has been operating a cluster with three nodes hosted in a data center for over 10 years. This production environment runs on Proxmox (version...

Hi, normally i dont make post, im use to spending a long time researching and getting the satisfaction of finding the answer myself. Im sure im probably already come across the answer but im unable to make it work in my lab environment. after hours and hours (probably over 20) of looking for...

I was trying to play with OpnSense (then PF Sense) and the VM was locked, not going anywhere. I tried to shut it down but it was hung. I waited for a couple of hours but after that even node shutdown won't work. Now when I force CPU stop and start from the physical button, I get this blank...

Guten Tag Zusammen, wir betreiben 3 Proxmox Knoten (pve01, pve02, pve03) in einem Cluster und unsere bisherige Storage Konfiguration hatte einen Storage, für ISO-Dateien pro Knoten. Wir wollten das ganze etwas optimieren und haben jetzt eine TrueNAS VM erstellt, welche wir als NFS Storage...

Hi all, I've used the below method to setup SR-IOV for my Intel X550T on Proxmox 7-x installs, but I can't seem to get it working on 8-x installs. Does anyone see what I'm missing or doing wrong? Noting I'm using systemd boot since I have ZFS, no GRUB. root@pve-labby:~# pveversion --verbose...

Hi everyone, I don't know if I'm the only one and if I have some misconfiguration on the VmWare or Proxmox side, but this is my situation: I would like to migrate virtual machines from a vmware cluster (version 8) to a proxmox version 8.2.2, I followed the document...

pve 8.2.2 I'm hoping someone else may have some insight for me that is running pfSense as a VM on their proxmox instance and maybe not seeing the speeds they expect between VLANs. Iperf3 testing between VMs on the same VLAN I can reach transfer speeds of ~30Gbps. But between VMs on different...

I am running Proxmox 8.2.2 on a Minisforum um790pro with kernel 6.8. I cannot access devices on USB 3.2 ports to pass through to a VM. I have booted from a USB attached to these ports, and a keyboard attached to the ports also works in the BIOS, so I don't think it is a hardware issue. I can...

Hi everyone, I'm currently facing a problem when adding a QDevice to a 2-node cluster. Current cluster: 2x Proxmox VE 8.2.2 QDevice: 1x Proxmox Backup-Server 3.2-2 - I can remote from both nodes into PBS as root - corosync-qdevice is installed on both nodes - corosync-qnetd and...

The Proxmox 8.2.2 server we have running suddenly rebooted and looking through the dmesg log all I see of interest is 'Hardware Error'. I would like to understand what likely caused this and how to prevent it. We are building software on this system and it isn't ideal for it to randomly shutdown...

Hi everyone, First thread and newbie here. I have just upgraded from 8.1 to 8.2 and when I restarted, my server got stuck. I logged to IPMI and saw the cursor blinking on y black window. I reset the server and could see that booting on the new kernel 6.8.4-3-pve was the cause. Booting from the...

I am not an expert on Linux, I have a few VMs but this morning I woke up to the proxmox server stuck on the grub screen (screenshot attached). I tried boot and I tried https://pve.proxmox.com/wiki/Recover_From_Grub_Failure#Temporary_Workaround but it doesn't boot. Any idea on how to fix this...

I have an 8.1.4 ProxMox Ceph cluster. I'm trying to add a new host that is running the latest 8.2.2 to the cluster but when I try and add the OSD I get the failure "pveceph configuration not initialized - missing '/etc/pve/ceph'". There's a commit that went in on Feb 16, 2024 that looks like...

I recently setup a new instance of Proxmox 8.2.2 after my Intel i5 10500 died on an AMD 5700UG based system and haven't had much luck getting iGPU transcoding working (so much easier on my old Core i5) so I opted to install an ASROCK Intel Arc A380 to do hardware transcoding in a kubernetes pod...

I just had this happen to a 2nd node. This one while still setting it up, before joining cluster. I had this happen to a node I had & I tried a bunch of things but eventually ended up migrating everything off it & re-installing. I thought it had happened as a result of an in-place-upgrade to...

Hi, I have a node with Intel(R) Xeon(R) E-2274G CPU and 32GB RAM. I´m using Proxmox 8.2.2 and I have only 2 lxc , one is off. I have high RAM usage , now at 22 out of 32 and its keep increasing daily till it will crash my system. I don´t use ZFS and its a fresh install. Any suggestion ?

Server - 2x CPU / 768 GB RAM / 6x 1gbe NICs / 2x 10Gbe NIC's Storage - Very High end flash storage Networking - 2x Switches for "server access" (iLO / iDrac + back end server network) -- we will call this management - 2x Switches for "Trunk Network" (VM's live here) -- we will call this VM...

Hi Everyone! The problem is when i passtrough Nvidia 1060 everything works right but when i create a new windows vm and passtrough RX560, the host goes offline and there is no network. I have proxmox that i have built last week. Specs looks like this: Asrock B450M Pro4 R2.0 bios ver. P5.70...

Good morning, I wanted to create a virtual machine via CLI using the 'qm' command. If I try to enter 'q35' it works, but if I enter 'i440fx' it gives me an error. root@pve:~# qm create 100 --machine q35 root@pve:~# qm create 101 --machine i440fx 400 Parameter verification failed. machine...