passthrough

Issues/Description: I set up Proxmox on my server, and started working on setting up an Ubuntu 24.04.02 VM, with an end goal of hosting ollama with GPU passthrough. During initial setup of Ubuntu VM, it worked great, was quite stable and initially had little issues. After adding the GPUs for...

Hello, I'm having a problem with GPU passthrough in my VM. Any help would be appreciated. I was able to get passthrough working on an LXC as an alternative, but the fact that it doesn't work on a VM is giving me a headache. When I try to start the VM, it always gives the same error: error...

Hi everyone, I've ran following server for a long time: 1 SSD with Fedora Server installed 2x large HDD's in ZFS mirror in Fedora Server I've upgraded my server hardware and now want to use proxmox. I've installed it and added some drives for the disk images to store the Fedora Server VM. I am...

Hello Team, I have a query: here is my setup: 1st: I have a VM sitting in a 5 node proxmox cluster. 2nd: I assigned a LUN to all the nodes on this cluster and using multipathing as well. 3rd: Then I assigned this LUN as passthrough to this VM. For which I ran this command on one of the nodes...

I had a simple issue a few years ago and it seem to resolve itself, but for the past few days I have been having issues with my Unraid VM, my setup is as follows B450 mother with 32Gib RAM Proxmox is on a Enterprise 1TB SSD plug straight into a motherboard SATA I then have a LSI SATA card with...

I have followed this guide https://pve.proxmox.com/wiki/PCI(e)_Passthrough to set up GPU passthrough for my NVIDIA 2070 card to an ubuntu server VM. I also installed the NVIDIA drivers on the VM end sudo apt install nvidia-driver-570 sudo update-initramfs -u Functionally, it works - I have...

Hi all, My setup: Proxmox VE 8.4.1 Intel Atom J4105 32GB Several VMs and containers Boot mode: EFI I have recently been having the following issue on my TrueNAS VM (102) with PCIe passthrough of the SATA controllers. When Proxmox starts, it attempts to automatically start VM102 because...

Hi all, I configured a windows 10 VM on my Proxmox server (v 8.4.1). I successfully passed through the GPU (Nvidia Quadro P4000). What I'm trying to achieve is to connect a monitor (or 3) to the windows 10 VM via the passed through Nvidia Quadro P4000. I plugged my Display Port cable in each of...

Hi! I recently trying to migrate my homelab to proxmox VMs. The first VM that I tried to setup is my TrueNAS that run Plex and some small apps.. so I need passthrough my GPU, an Intel Arc A380 Low Profile. But I'm receiving an error during when I start the VM This is my actual configs and...

Hi there, I was using GPU passthrough for my VM using a Nvidia RTX 2080 Ti and it worked perfectly. I set my config following one of the many guide, like this one : https://forum.proxmox.com/threads/pci-gpu-passthrough-on-proxmox-ve-8-installation-and-configuration.130218/ Since I updated my...

I set a USB radio to passthrough proxmox to my Home Assistant VM. This works fine, but sometimes I have to remove it. If I try to start the VM without the USB device plugged in, the VM will NEVER start, with this message: This makes no sense to me. Why wouldn't it just keep booting after...

Hi all. I need help, I have gone into a rabbit hole... Let me try to put into words the issue. When I reboot my proxmox host (13900 + z790 + 4060ti + doesn't matter) and manually spin down the spinning rust (9 of them) and let proxmox settle, my watt meter is around 32W give or take. Great...

Hello, I've had PCIe passthrough working for quite some time on a TRX50 Threadripper build with an Nvidia 4070ti Super Asus Tuf and an AMD 7900xtx Sapphire Pulse. I recently swapped the 4070ti Super out for an AMD 7700xt Sapphire Pulse, though, and started having issues. On two different...

Hi guys, I'm trying to passthrough the iGPU to Windows VM I followed many steps but there was still error 43 in Windows, please help My promox hardware: 8700G 64GB G.Skill X5 Flare Mainboard B650 Gigabyte Aorus Elite AX ver 1.3 1 HDD 16TB + 2 SSD 1TB My /etc/default/grub GRUB_DEFAULT=0...

Hi, I set up GPU passthrough on Proxmox following these steps: Step 1:Edit GRUB nano /etc/default/grub GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on iommu=pt pcie_acs_override=downstream,multifunction nofb nomodeset Step 2: Update GRUB update-grub Step 3: Edit the module...

Hi there! Having an issue with a new server build (Dell R730) running Proxmox as the hypervisor. I'm trying to pass the controller (and therefore all disks) through to a TrueNAS VM. The R730 came with an H730 RAID Card which I switched to HBA mode, but I ran into the issue detailed below and...

Hi all, I'm having a weird issue with GPU passthrough. Some facts: - Proxmox 8.3.0 - Supermicro server with plenty x16 slots (built for GPU) - 1 integrated gpu for the OS - 4 x Nvidia 4070 TI Super (blower fan) - 1 x Nvidia A1000 Now, the passthrough is working fine on 4 of the 5 cards. Weird...

On a H12SSL-NT supermicro superserver with AMD EPYC 7543 cpu, and 3x A6000, passing them through to linux vms stalls the vm badly in the beginning but eventually manages to boot, - found out by accident - . I can install the nvidia drivers inside and can run various compute workloads like llms...

I got the following error when backing up overnight: ERROR: Backup of VM 114 failed - PCI device '0000:15:00.0' already in use by VMID '107' Now I know why this is - just as it says, the PCI device (a GPU in this case), is already in use. However, I wonder what the recommended solution is? I...

null