net setup

  1. Z

    Networking Novice Struggling to build out Separate Physical Network for Ceph Cluster

    What i currently have is 6 node cluster all running on a single 10GB network, What im looking to setup is the same cluster running on three separate physical networks, 1. PVE Management network 2. Application network (VMs) 3. Ceph I'm assuming this is pretty standard but i can't seem to get...
  2. G

    no internet from within container

    This is on a fresh PVE 8.0.4 installation on a Hetzner Server. So this node is in a datacenter. There are no private ip addresses involved. I mention this, because all posts I found are related to private ip addresses. The ip addresses in this post are changed for privacy: PVE Node has IP...
  3. L

    Netzwerkkonfiguration für Proxmox

    Hallo Zusammen, ich wollte schon seit längerem mir einen kleinen Home-Server zusammenbasteln und habe mir nun die Hardware hierfür zugelegt. Nun wollte ich Proxmox installieren, leider scheitert es immer an der Aufschaltung auf die Weboberfläche des Servers. Gibt es hier irgendwelche...
  4. G

    How work OvS with ifupdown2 in proxmox

    Hello, I would like to know how the ifupdown2 and OvS implementation in proxmox works because on a VM of my pve, I have a trunk that comes from the OvS of my PVE but when the VM is restarted the OvS service requires a restart for the flows to work whereas when I restart the pve it works...
  5. L

    PFSense - I can't access the guest from WAN port

    Hello, newbie here. I have this scenario: ISP Router => inp0s25 (onboard nic) => vmbr0 (Linux Bridge) => Guest WAN inp1s1 (PCI nic) => vmbr1 (linux Bridge) => Guest LAN After install, the WAN interface get DHCP IP from ISP router normally, but I can't access the PFSense Web Configurator on PC...
  6. A

    Cant ssh to VM after creation with terraform and proxmox

    hello, i have a problem to connect to vm which i create with terraform, i do not have access to the GUI and serial terminal of the vm. root@ns31245211:~# qm config 100 agent: 1 bios: seabios boot: cdn cores: 8 cpu: kvm64 ipconfig0: ip=10.0.2.99/24,gw=10.0.2.2 memory: 12288 name...
  7. D

    HomeLab Suggestions!!

    Idea: I currently have two machines at home with config below: Machine 1: Case: Lenovo ThinkstationC30 CPU:2 x E5-2640V2 Motherboard: Lenovo Proprietary Memory: 64GB ECC Ram Storage: 120GB MSata Drive for Proxmox OS 1TB 7200rpm Sratch Drive 2x 3.5 Seagate NAS IronWolf 2 TB ( Slow VM...
  8. M

    Set network interface name in VM

    Hallo! I test migration from Ovirt to Proxmox with keep existing VM rbd images on CEPH storages. Problem: In oVirt all Centos VM have type of Netcard "VirtIO" - same as I set in Proxmox, but in oVirt it use default name for interface "ens3" but in Proxmox VM got name "ens18" So network is...
Top Bottom