i have lxc containers hostes on ceph storage (with speed over 5GBs )
when making backup using zstd the speed is between 20-90MBs
the storage i am writing to store the backup have read/write speed around 1GB
proxmox 6.2.12
on some hosts the ZSTD backup compression is not working?
any idea why ?
this is the error?
Parameter verification failed. (400)
compress: value 'zstd' does not have a value in the enumeration '0, 1, gzip, lzo'
solution:
upgrade proxmox to latest version on all nodes.
hello,
on two different laptops, connecting a mobile (different mobiles, but both in ADB) and passing it through to an unpriv. LXC give different results.
on laptop A, the device entry created looks like
crw-rw-rw-+ 1 root dialout 189, 138 Sep 24 07:27 /dev/bus/usb/002/011
in the container...
Hi! Stuck on trying to change lxc config via api, example:
curl -Ss --insecure -X PUT --header 'Authorization: PVEAPIToken=root@pam!test=UUID' --data-urlencode onboot=1 "https://pve1:8006/api2/json/nodes/pve1/lxc/107/config"|jq '.'
{
"data": null
}
Problem only with this PUT method, other...
I'm running into this issue which I can't seem to solve on my own with man and the docs.
I tried many different configs to no avail and this honestly doesn't sound like something so hard, unless I'm missing a key point.
Either way, thanks in advance for pointing me in the right direction.
I'm...
I tried to upgrade my PVE Server, and accidentally smashed it, so I decided to set up a new one.
Every ISO and every template got coppied successfully, but I still cant restore (on my local -> content -> select backup / restore) the backup
The server always tell me:
Logical volume...
Hi, might sound a little stupid, but I am searching on Google since yesterday evening and don't know if I just search wrong.
I tried to Upgrade my Proxmox from 4.4 to 6.3
So i backuped my VM and my Containers (via WebGUI) and tried to upgrade the Server. Well, this went horribly wrong, and...
Hi everybody,
I'm quite new to proxmox and networking in general, I really enjoy learning about networking, virtualisation and selfhosting.
I recently set up my pfsense router with a few VLANs and got almost everything is working the way I want. I now want to set up a nextcloud server on a DMZ...
only solution i found so far is to delete the binds (nfs mount) clone and then remake them
any other solutions ?
example for bind that fails:
mp3: /mnt/pve/docs,mp=/mnt/docs,backup=0,shared=1,replicate=0
I am running PfSense on Proxmox as VM and I am running NTOPNG as LXC Container on same Proxmox server, I have created a Linux Bridge on Proxmox to PfSense.
The problem I am running into is that ntopng is not detecting public network activity on those Linux Interfaces, it can only see local...
I am running PfSense on Proxmox as VM and I am running NTOPNG as LXC Container on same Proxmox server, I have created a Linux Bridge on Proxmox to PfSense.
The problem I am running into is that ntopng is not detecting public network activity on those Linux Interfaces, it can only see local...
Hello,
running 6.2 here. I have to install a Flexlm license server to handle a couple of Autocad network (floating) licenses. Obviously this is not a tough job and flexlm does exist for Linux (AFAIK, see also https://www.plexim.com/dstlm ). Therefore I'd like to avoid using a full KVM for the...
Hello.
I was converted openvz(Proxmox VE 1.9) with ubuntu 6.06 and ubuntu 10.04 servers to lxc(Proxmox VE 6.2-4).
If I press shutdown, I get this error
can't lock file '/run/lock/lxc/pve-config-107.lock' - got timeout (500)
command 'lxc-stop -n 107 --nokill --timeout 60' failed: exit code 1...
Hello,
so I had a problem with a container that wouldn't shut down so I killed the process so it would shut down since I didn't need it anymore. After that I destroyed the container and checked for updates. I updated the host system and since there was a kernel update I decided to shut down all...
Recently installed Proxmox, and I'm trying to create a container, but I'm getting this error.
thelmgn@Cana:~$ sudo cat /tmp/lxc-100.log
lxc-start 100 20200831215524.275 INFO confile - confile.c:set_config_idmaps:2055 - Read uid map: type u nsid 0 hostid 100000 range 65536
lxc-start 100...
Hi forum, I have a server running with 30 lxc containers, last night, the host crashed and rebooted without any signs, after that, the containers could not start at all.
Here are some information:
root@rvh-bt-gen2:~# pct config 13137
arch: amd64
cmode: shell
cores: 1
cpulimit: 1.0
hostname...
I am trying to setup an LXC container (debian) as a kubernetes node.
I am so far that the only thing in the way is the kubeadm init script...
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR SystemVerification]: failed to parse kernel config: unable to...
Hello,
I converted openvz to lxc without any fails. When I press Start, container don`t start.
Version Ubuntu is 6.06 inside container.
I included support old version Ubuntu in file /usr/share/perl5/PVE/LXC/Setup/Ubuntu.pm
my $known_versions = {
'20.04' => 1, # focal LTS
'19.10' => 1, #...
Hello everyone!
When i was running some tests with privileged container (based on old centos distribution) - i`m find that cpulimit doesn`t work if i use chrt command.
I think that it`s correct, but cannot find proper way to deal with this (CAP_SYS_NICE give all capabilities).
Can anyone know -...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.