hba mode

  1. P

    Replace the drives in zfsraid1

    Hi guys I have a weird situtation tought you could help me I have a cluster of three nodes running proxmox + ceph. Ive installed the os (+ceph) on 2 x usb drive as zfs raid1, now I have high I/O wait on the CPU because the usbs are slow. I added 2 x SAS 15K and I’m thinking if its possible to...
  2. D

    Proxmox 5.1 won't boot on ZFS and 440AR in HBA mode (HP DL380 Gen9 server)

    Hi everybody, I want to install Proxmox 5.1 on HP DL380 Gen9 with UEFI Mode. I managed to switch the HP Smart array P440ar controller to HBA mode. The problem is that once Proxmox 5.1 is installed and the server is restarted... the server does not start on the "Proxmox" installation because it...
  3. C

    [SOLVED] Empfehlung SAS oder SSD mit HBA

    Hallo Bezüglich meinem aktuellen Projekt sieht es nun so aus, dass ich noch über einen Raid Controller von LSI verfüge 9240-4i. Diesen würde ich mal versuchen in IT mode zu flashen und dann 4 HDD's anschliessen. Auf die 4 Platten kommen dann auch die VM's drauf. Parallel dazu hängen dann noch...
  4. M

    ZFS Install with LSI MegaRAID SAS 9240-8i RAID-10 and JBOD HBA Mode Firmware IT Mode

    We want to make a zfs storage system with RAID 10. Attached to the MegaRAID SAS 9240-8i Controller are six disks with JBOD We have installed the MegaRaid Tools from http://hwraid.le-vert.net/wiki/LSIMegaRAIDSAS root@srv002:~# megaclisas-status -- Controller information -- -- ID | H/W...
Top Bottom