hardware raid

Hi all, Last ditch effort to hopefully find a solution before I use a different FS (but would much rather ZFS)! If any of the below is not clear or I have left out important information please do let me know. Appreciate any help and advice. Problem Unable to create a ZFS pool using the drives...

Hello, I have a bit of a niche setup. I have 8x NVMe drives in a custom-built computer and what I am trying to do is maximize processing performance by eliminating as many bottlenecks as I can. These 8x NVMe drives are attached to the motherboard by PCIe. (4x NVMe disks in each PCIe ASUS...

Hi, I would like to talk about a topic already discussed hundreds of times here on the forum, but in slightly more scientific and practical terms: ZFS on top of Hardware RAID Introduction I already know all the warnings regarding this configuration, but since in most cases the references...

Hi guys, I would like to know if there is any way in which I can use ZFS (to be able to use Replication) if I have a hardware raid controller. Can ZFS be configured as a single disk and have the raid handled by the hardware? My hardware is 2: HPE Proliant DL360 Gen10 8SFF CTO with HPE Smart...

I have a DELL Poweredge R630 with the current setup: CHIP: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 24 cores RAM: 64GB STORAGE: 10x 1.2TB SAS drives for RAID 10 DELL PERC H730 Mini gives me around 6TB in RAID 10 I will format this server and install proxmox. The confussion is from watching...

Hi everyone! I just bought a server and installed Proxmox VE on a ssd device. Now I want to run only one VM with Windows Server 2022. The VM should be stored on my Microchip Adaptec SmartRAID 3101E-4i Controller with 4 SATA SSD devices, which I turned into a RAID10. That worked very easy. The...

Hallo zusammen Ich spiele momentan gerade etwas mit Proxmox herum um es zu lernen, und bin auf folgendes Problem gestossen: Mein Server (HP Proliant dl380 gen9) hat einen integrierten Hardware Raid Controller (Smart Array P440ar). Momentan habe ich ein Raid10 Array (ext4) aus 4 ssds, welches...

Hi guys, Need help to get best performance for my server. - DELL PowerEdge R820 - CPU : 4 x 2.60Ghz E5-4650L Xeon Eight Core - RAM : 12 x 16GB PC3L-10600, [192GB Total] - HDD : 8 x 960GB SSD SATA 2.5" 6GB/s (Samsung PM853T) - RAID : PERC H710 (I ordered a H310 since H710 doesn't support HBA or...

Hallo Proxmox Community, Wir bekommen einen neuen Server mit folgender Ausstattung: Dell PowerEdge R540 über 64GB Ram PERC730+ RAID 4x 960GB SSD SATA Das Ziel ist maximale Performance, auch IO. überwiegend Windows Server VMs, einige Linux Vms. Da die Hardware recht neu ist konnte ich dazu...

Hello, I would like to build a HA Proxmox Cluster. I reserve 5 x server for this project with these specs; 2 x Server; Fujitsu PRIMERGY RX1330 M3 Intel Xeon E3-1230v6 3.50GHz Memory: 32GB ECC DDR4 RAM 2x 120GB SSD (OS) 2x 250GB PCI-E SSD (Pool) (planing to use Raid1) 2x Intel Corporation...

Hi, most of our servers have 6-8 SSD Hard drives with RAID Controller that include 1GB-2GB Cache now, the question is what is the recommended configuration for Proxmox 5 focus on Availability and best performance: 1. Hardware RAID 10? 2. ZFS with RAID10? 3. Hardware RAID1 with ZFS Raid0? 4...

Hi, I'm renting some servers with hardware raid. RAID controller (P222) RAID controller (P420) Configured as hardware RAID 0. I'm using ZFS (RAID1), what danger can I have ?, or will I only lose performance, a few days ago I use it like this and at the moment everything normal. Thanks for...