guide

auto lo iface lo inet loopback #auto ens33 iface lo inet6 loopback iface ens33 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.170.132/24 gateway 192.168.170.2 bridge-ports ens33 bridge-stp off bridge-fd 0 bridge-vlan-aware yes...

Hello there, I'm completely new to the world of Proxmox. While the experience has been exciting , it has been alot of trial by fire. I was able to follow youtube guides and install Proxmox easily on a Beelink SER 5 - Ryzen 7 5800H. I successfully installed and migrated Home Assistant. I was...

*Asrock B760 Pro RS *i5-14500 *NVIDIA RTX 4060TI Hello, I have a problem with the complete configuration, I don't know, it will work, but the installation is ok, and proxmox itself has a problem that it talks about the kernel, the company may be faulty, but I did it under DEBIAN, then I added a...

Hello wanted to make a guide on how to change a drive on Proxmox backup server that only has 4 drives and all using rpool as a boot device and pve storage First take the drive you want to replace offline. to identify the drive that you want to replace by going into PBS and go to Storage/Tape...

Good Day! Excite bike! My rig is finally all put together and ready to go. Hardware Configuration: Asus Prime Z490-P motherboard Intel Core i3-10100 CPU nVidia GT 1030 GPU Here is the plan (well, the bits that pertain to my question): - Proxmox HV - - VM or container (TBD depending on which...

Since there is a complete lack of SPAN/Mirror examples using Linux Bridges into Security Onion, I thought I'd post what got working.... Also is an example using multiple bridge mirrors, which is discussed but never actually shown anywhere. Disclaimer, I am still in the very early stages of...

Hi - firstly, I have looked for a guide on how best to do this, but haven't found anything that I can make sense of, mostly because the majority appears to (understandably) be targeted towards Enterprise environments - if i've missed one, I would be very grateful for a link, and totally...

I have created this post with the hope it can assist newcomers, and not only, with decision making. This post uses acronyms and is a preamble to a full set of articles which are best viewed on my portal, as I provide full online glossary, links, graphics and easy to follow instructions. In any...

I have read to many OMV users that, like me, one day their sda system disk began to run out of space and despite increasing the space in proxmox, that space is not reflected in OMV So I made this guide of what has always worked for me hoping that someone will help and at the same time can help...

IPv6 issued to me by SYS XXXX:XXXX:XX:XX6e::/64 (X's are redacted for privacy) I am using Windows 10 as a testbed running in Proxmox 7.1-8 For IPv6 config: Address: XXXX:XXXX:XX:XX6e:0000:0000:0000:1000 (you can change any of the 0's in the last 4 blocks, I used 1000) Prefix: 64 GW...

Hi! I would like to install Proxmox on my HP MicroServer Gen8 (currently using ESXi). I've been told that there are some compatibility issues between Proxmox and HP Microserver Gen8 (especially about the fan, which always runs at 100%). Are there still those issues? Is there a tutorial or a...

Hi, I want to create a PROXMOX iso (on Debian 10.3.0) with a number of features (I mean I don't want certain abilities and I want to add my own stuff), which after created it I can install it on a new computer like regular PROXMOX iso that you can download. I searched on the internet and found...

Hi all, I've been trying to set up a 2 node storage replication on the latest 5.3 version for a while to no avail :( I have 2 identical hosts with Proxmox installed on a 1TB virtual disk (split into local and local-LVM). In addition each server has another 4TB virtual disk with no data yet. I...

Noob friendly proxmox guide for how to setup a two node proxmox and a replica glusterfs volume, (as well as passing through the glusterfs to a container) Step 1-7 needs to be done on every node (server). 1. Install to the first sata/sas disk, keep only one disk inside. Make a bootable usb...