freeze

So I have currently two identical Intel NUC11PAHi3 running as nodes for testing, no VMs, LXCs only. This is my first Proxmox experience and also with this forum, I am afraid this will be a lonely post that no one replies to from what I found (similar to my situation): >...

Hi, I updated to the latest version of proxmox on the following HW: Supermicro X10DRW-i + 2x 2686v4 + 128GB RAM The problem is the following: Boot freezes as shown. The temperature of the processors reaches the critical level. If I boot without OS, the server remains active for a long time. I...

Hello there, I'm new here and I start off with something that I haven't managed to find, but maybe I just can't search good enough. For a few weeks, I've been haunted by strange Win11 VM freezes, what happens is the most awkward OS freeze I've ever seen. The sound just stops to silence, no...

Hello, there is a problem with LXC containers on my setup. When trying to use docker or use systemctl, the executables are just freezing for a couple minutes without cmd output. lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 48 bits...

Hey together :-) ! We have a setup of 23 hosts and a bunch of LXCs running on them. We are using the replication feature to replicate all ZFS resources. Everything beautiful! But regularly we face the problem, that something freezes. When this happens, we find the following state: - LXC doing...

HI Guys, My Proxmox is freezing and need a reboot every 4 / 5 hours, even with low cpu load. What i've tried so far: - Switched the NVME's (they are in raid1 2x 2TB, also tried without raid, same issue) - Switched the RAM modules - Reinstalled proxmox with 7.4 - Reinstalled proxmox with 8.0 -...

I have a cluster with 6 nodes running on version 7.4, all nodes are Dell PowerEdge R630 and now I needed to add the seventh node which is Dell PowerEdge R640. Live migration from a VM residing on a R630 host to R640 goes fine, but when migrating from the new R640 host to R630 the VM...

Hi all, I have a strange behavior on my Proxmox VE. The whole system freeze after some time of "idle", meaning I do not interact with it, but my VMs are still running. Sometimes after 1 hour sometimes after 24 hours. I am not really able to find the issue in the logs most probably because I...

Hello guys, I've been trying to find the cause of random freezing of one of my Proxmox Nodes for a week now, but I cant find anything, as I havent done something like this up until now. Here is the output of journalctl -b -1 and the general Syslog before the failure attached. Also here as a...

CPU: AMD R9 5900HX MEM: 32G it just freeze randomly, might be in couple of hours or miniutes after boots. couple days ago, i found it would got 100% freeze, if i move vm disk from one physical disk to another. but i think i fixed it by changing dirty* options in /etc/sysctl.conf still get...

I'm facing an issue with a cluster with 2 Proxmox VE 7.3 machines. Both are very different machines and presents the same issue. The issue is: the host freezes during a heavy load. I found a few threads about it, but nothing solved my issue. Basically, when I try to migrate a VM/CT from a node...

This morning one of our Windows VM froze during a Windows Update and didn't respond anymore. I set the state in HA from started to stopped and stopped the VM manually. Next I set the HA state from stopped to started. The VM tried to start but failed. Proxmox then migrated the VM to another host...

Hi everyone, I've been experimenting a bit with Proxmox for the last few months to see if it can be useful for my use case (home automation and security). In this time I have tried preparing a Windows 10 VM to run some NVR software, which benefits a lot from using a GPU for hardware video...

Hi all, I recently started up a homeserver with a bunch of replaced parts from my main Rig. I currently have Proxmox 7.3-6 installed on an m.2ssd, with another m.2 1tb for VM disks and backups. I have 3 4tb HDD passed through to my OMV VM that I am using as a NAS in RaidZ1 for files, backups...

Hi Forum, thank you ahead for considering in helping me out here. What´s the problem? installed HA on Proxmox VM (running on a futro) Runs really! smoothly for a few days. Than the Home assistant application wasn´t available. Looking into the Logs it loocks like the attached screenshot I...

Guten Morgen, Proxmox 7.3 läuft auf einen Intel NUC8BEB, leider friert der mini PC nach einer uptime von genau 4 Tagen nachts um 2:00uhr ein. (HDD LED und LAN ist aus, nur Power LED ist an) Leider zeigt die Log (jedenfalls mir) nichts an. Den PC habe ich im Dezember 2022 eingerichtet und seit...

Good afternoon community! I'm trying to install proxmox on a hp proliant 360 G7 server that has an Nvidia gforce 710 video card. The problem is that when I install it, the installation freezes and the black screen. These is a screenshots that I was able to do in debug mode. just after this...

Hi I'm experiencing an issue with installing a desktop Ubuntu 22.04. I create the VM as usual but after creating it can starting it for the fist time it boots in the installation and gets stuck on this window before it shows the options to try or install ubuntu. Also viewing the resource...

Hallo, ich betreibe mehrere 3 Node PVE HA Cluster (7.2-7) ohne Ceph (nur lokales ZFS mit Replication). Alle drei PVE Server sind an eine USV/UPS angeschlossen, welche bei niedrigem Batteriestand den Shutdown triggert. d.h. Alle drei Nodes werden (mehr oder weniger) Zeitversetzt...

Hi Proxmox community, I experience these random freezes multiple times per day on new Dell Optiplex 3000 (12th Gen Intel(R) Core(TM) i5-12500T). I have tried different kernels and BIOS settings but it doesn't help. I also updated newest 09/02/2022 BIOS (1.5.2) and disabled power states, WLAN...