fiber

Hi guys, I have 2 Miniserver MS-01 with 4 ports, 2 ethernet and 2 fiber. After doing the new update (no-enterprise) 8.2 it seems that the kernel change the names of the fiber interfaces, (before the name was enp2s0f0, and after the update enp2s0f0np0). After changing the name of the...

Hi! I have a question about the connection and compatibility that proxmox can give me when connecting direct 4 Lenovo Servers to a Storage via 16GB fiber channel. (DAS Connectivity). *Without SAN Switch* The storage has 2 controllers, each one with 4 fiber ports, which allows us to connect a...

ref: https://forum.proxmox.com/threads/how-to-pass-vlan-0-priority-tags-to-pfsense-for-dhcp.112374/ I need to set a bridge flag to pass certain traffic to the vm. The problem is the bridge does not exist until *after* the vm is started. echo 8 > /sys/class/net/fwbr105i1/bridge/group_fwd_mask...

Hey everyone, still getting some things figured out. So i've been working trying to get some networking up and running. I've tried a few solutions i've seen online but havent gained much traction personally, so i figured i'd reach out. This is my interface setup at the moment auto lo iface lo...

Hello everyone. I'm new on proxmox. So please forgive me if any mistake i made. I have deploy a new proxmox 5.3 installation. I use QuantaGrid D52BQ-2U server which include 2 Ethernet and 2 SFP+ ( Intel® Ethernet Converged Network Adapter X520-SR2 ) module on PCI card. When i have done proxmox...

Hi! I’m trying to take advantage of a 10G Mellanox ConnectX-3 EN (running the most recent firmware version, 2.42.5000) installed in my Proxmox (5.2) to utilize the full 10G bandwidth between Proxmox and a seperate FreeNAS (11.1) box and I’m running into trouble. My Proxmox host (pve) is on an...

Hi, I have 2 hosts with 8G ports(sfp+), but I cannot see them in the GUI, either in cli. I have connected this ports directly with fiber optic patchcord with a Qnap NAS which has 10G ports also. Has anyone faced with this scenario?

It seems that while 4.2 came with a blast of fresh air, it has broken my box. I have Qlogic dual port fiber cards. I'm using IOMMU to give these cards to my guest system. After upgrade from 4.1 it has only on card available to guest. lspci: 01:00.0 Fibre Channel: QLogic Corp. ISP2432-based...