disks

Version: Virtual Environment 8.2.4 Issue: the disks of any vm with fedora 40 have now bus resets because they "leave" the bus. the Vm have been updated from F39 to F40 today and right after the updates, this started. If teh drive leaves the bus, the system has no cpu usage, but high load and...

Hello, I'm new to Proxmox. So, if any term is wrong help me out. I have a HPE Proliant DL380 G6 with 7 disks at my lab. I have installed Proxmox on two of the disks with RAID 10. I have left the other ones out of the RAID as I want to test Ceph for my environment. The other five disks are not...

I have some previously used in another project disks I wish to use with proxmox backup server but I can't figure out how to wipe the disks to be able to setup a datastore. I'm in the admin > Storage/Disks tab and I don't see a wipe disk button. I looked at the storage help article...

Hello! I reset my proxmox nodes hostname and then joined a cluster and now the dropdown for my node only shows local when it had previously shown several other disks/volumes. In disks/directory I see the directories of the drives and where their path is mounted and I can access all the data on...

...

I first had a 1TB SSD and a secondary 1TB hdd in my system. I upgraded the secondary 1TB HDD to a 2TB SSD. I created the directory on the old 1TB HDD so now i have a 1TB directory and can't seem to resize it to 2TB. Now the problem is that the partition is 2TB but the directory doesn't change...

Hey folks, When browsing this forum, I've seen a couple of different recommendations on which of these settings to choose (especially when it came to NFS Storage options). I was wondering if anybody could educate us on which one of these are bests for the various use cases. (and for personaly...

So I have built 2 new Proxmox servers. I have setup the networking but had a question about storage. I have a RAID2 for OS installation I have another RAID5 for VM/Container storage I was unable to format the RAID5 via the GUI but found where someone wiped/zero the disk "dd if=/dev/zero...

When I install Proxmox 8.0.2, I get: I have four absolutely same disks I have data on two disks, but I do not know which disks, I only know the serial numbers of these disks. How can i get serials some as: /dev/sda --- 2332E86834B7 /dev/sdb --- 2332E86834BA /dev/sdc --- 2332E86834BC /dev/sdd...

Hello, I use a MiniPC as a proxmox backup server. I have a 2.5 inch 128GB SSD connected via a USB3.0 adapter. The operating system is installed on it. And I have an 8TB USB hard drive connected for the backups. I know this is not the best solution, but it has worked for me for over a year...

Hi! I would like to switch from a hard disk to an ssd with the same size, in my proxmox server. If i clone them with Clonezilla, does everything work or do i have to make changes? Thanks!

Hello, I recently added a NVIDIA Quadro P400 as a 2nd GPU to my Proxmox Node for plex transcoding and PiKVM. My Hardware thus consists of ASRock x570 Steel Legend AMD Ryzen 7 5800x NVIDIA RTX 3060 NVIDIA Quadro P400 2x M.2 Samsung 980 Pro 1TB PCIE 4.0 ssd 2x sata 3 ssd's a bunch of sata hdd's...

HI All Honestly im newbie at Proxmox I have a disk with many virtual drives (.img files) what i want is to import them and use them in proxmox a little bit of context, that hard drive came from a previous unraid server , my idea is migrate all my vms to proxmox i am able to see my old...

Hello, what your suggest to auto backup for specific disk of vm bcs i have data that need to backup daily and another not importent possible weekly to any one have idea prefers through Web interface. Best Regards

Após aumentar o disco, simplesmente apagou os dados do disco. Algo que posso fazer?

I'm currently running proxmox on two 8TB drives, using zfs, and they're mirrored. My `zpool status` looks like this: pool: rpool state: ONLINE scan: scrub repaired 0B in 1 days 03:13:29 with 0 errors on Mon Nov 14 03:37:30 2022 config: NAME...

Hey everyone, I have some of my VM Disks on my Unraid NAS on a NFS share, connected via a 10Gbit link; Now, after some time, i started noticing ATA Errors coming up in my Nextcloud VM. It has 2 Disks, one for data and one for the OS. While the VM itself runs fine, the disk for the data...

I have a question about design passing through 10 disks to an OpenMediaVault VM using RAID6 on the VM. When creating this RAID6 on the OMV VM everything works correctly. Something that got me thinking about long-term recovery was when I had to restore my OMV VM, then manually repassing through...

Hi guys. I'm building my first server and I started just trying some VMs, learning Docker, learning how to passthrough iGPU and so. main specs: i5 10400 (6/12) 16gb ddr4 ram (I plan to put 16gb more) Now I bought 2 4TB NAS disks and I want to start pouring data there. I will tell you my plan...

Hi! This is something, I did not see anywhere else. I've got PVE 7.1-7 with a single node. For backup purposes an 8TB USB HDD is attached. "Disks" shows /dev/dsde and sde1 as 8 TB (it's one single EXT4 partition). When I click on that Volume (listed below the node's VMs), the summary shows 4.24...