ceph full-mesh

Hello, I have 4 Proxmox nodes with 2x10G interfaces. I am testing out a configuration without a switch. I have followed the tutorial in the https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server The only difference between my setup and the setup in the tutorial is the addition of the...

Looks like my route setup wants to route over one of the hosts to get to another, even though i have all 3 100G dac cables, attached, it wont direct connect to the other host for some reason? pve1 => .1 pve2 => .2 pve3 => .3 pve1 port1 -> pve2 port 1 pve1 port 2 -> pve3 port 1 pve3 port2 ->...

Hi everyone, I'm designing a new 3-node cluster. It's not the first cluster I make but it's the first with a full-mesh Ceph network (no dedicated switch) . Each node has a double 10G NIC and they're already physically connected each other. So I've been reading the docs and I think the best...

Hi, In the company we have decided to migrate our applications from a public cloud provider to our own solution based on proxmox ha cluster. Since this is the first such installation I have a great request for an opinion on the approach we have chosen for this. General assumptions: - 3...

Hi there I have 3 Proxmox nodes Supermicro SYS-120C-TN10R connected via Mellanox 100GbE ConnectX-6 Dx cards in cross-connect mode using MCP1600-C00AE30N DAC Cable Ethernet 100GbE QSFP28 0.5m # lspci -vv -s 98:00.0 98:00.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6...