10gbit/s network

I have a small cluster of just 2 devices, I will be adding a 3rd in the not too distant future. One of the nodes has 10gb uplink to external, the other only has 1gb. This means that synching between the two is limited to 1GB of course. I've added a 10gb network card to the node with 1GB...

Hallo zusammen Nutze schon seit längerem ein Intel NUC für OPNsense und ein Supermicro für Proxmox. Nun bin ich in der glücklichen Lage und habe ein 10Gbit Upgrade von meinem ISP bekommen. Gleichzeitig überlege ich mir wegen dem Stromverbrauch OPNsense als VM laufen zu lassen. Ist sowas...

So, like the title says, I'm only getting about 1.05Gbits/sec of bandwidth with iperf3 on my proxmox node. Doesn't matter if it's from VM to host, my personnal windows 10 machine (which also has a 10Gb NIC) to proxmox host or anything else, they all get about the same 1Gb speed. I tried...

Hey all, I'm in the process of setting up a Mikrotik CHR (Virtual Router) for routing 10Gb network traffic. However, testing with EXFOs has shown that, with random packet size, I am not getting anywhere near 10Gb/s (I'm getting around 6Gb/s average, should be closer to 8Gb/s). I've tried...

im trying to setup a network bridge between my 10gbit cards so my computer has a network card with 2 10gbit ports that i want to set up as a bridge in windows to effectively get "20gbit" between proxmox and my pc. proxmox server is behind my computer. so i have 2 10gbit in main pc going to...

Hi Community, im very new to this and installed Proxmox VE on my Server with Intel Xeon Gold 6230 CPU, X11dpi-nt mainboard and 256 GB RAM, 2x 10G network onboard. Somehow i am not able to get my 10g connection working with a router (fritzbox 7590). IPMI works fine. Is there any driver i need to...

Hello everyone, I have got the following problem: My Home-Server running Proxmox has some strange problems since I installed a 10GBit Network Card. If I write on a network share, it sometimes drops to a tranfer rate of 0 kbyte for several seconds (up to 15-20). The Proxmox-VM uses Virtio...

Hello! Did someone get success to get 10Gbit/s inside VM? I'm using HP DL 580 G7 with 10Gbit/s NetXen interfaces. Proxmox - 5.2. These interfaces are in the bridge which is in VM throw virtio interface. From host to host there is 10Gbit/s, from 1 VM to another in the same node there is10Gbit/s...