Search results

  1. P

    container won't stop and is unaccessible

    I have a container that won't stop and is not accessible via the network. Here is what I could find in the logs Nov 21 15:43:37 PROXMOX-IN-1 pvestatd[2928]: command '/usr/sbin/vzctl exec 122 /bin/cat /proc/net/dev' failed: exit code 8Nov 21 15:43:37 PROXMOX-IN-1 pvestatd[2928]: status update...
  2. P

    INTEL MFSYS25 OR MFSYS35 server module fail-over

    Hi Tom I know you guys have an mfsys25 for testing.. have you tested the Intel built-in fail-over between server modules on debian squeeze and is this working. I am currently unable to test since my modules are in production. If you haven't tested would you be willing to do so?
  3. P

    INTEL MFSYS25 OR MFSYS35 server module fail-over

    Hi everyone, Has anyone tested server module fail-over with ProxMox 2.x on the Intel mfsys25 or mfsys35. I am assuming the fail-over module needs to be identical as far motherboard and Processors to the primary server module. I am not sure if the RAM has to be identical. That is, if...
  4. P

    no video on system console

    Re: SOLVED Re: no video on system console also edit /etc/default/grub and change the following line to look like this: GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset" and do a update-grub to make it permanent
  5. P

    no video on system console

    SOLVED Re: no video on system console I think it is driver issue: Try this if you can see grub try appending "nomodeset" to the kernel line by pressing e at the boot prompt. see: http://forums.debian.net/viewtopic.php?f=17&t=63844#p368886 This worked for me.
  6. P

    root partition too big ?

    Tom can you clarify "depends on your usage" for the sizing of /dev/mapper/pve-root I have a 500 GB drive and 95 GB is being used for the /dev/mapper/pve-root I usually set the /dev/mapper/pve-root to 20 GB no matter what the size of the system, but never end up using more than 10 %...
  7. P

    Multipath configuration in Proxmox VE 2.x

    SOLVED: Added HOW-TO to WIKI I created a Multi-Path How-to specific for the INTEL MFSYS25/35 on the PVE Wiki HERE please take a look and provide any feedback for improvements! Thanks everyone for your help!! Thanks KAYA!
  8. P

    ProxMox on a direct attached shared storage system

    Added HOW-TO to WIKI for Multi-path I created a Multi-Path How-to specific for the INTEL MFSYS25/35 on the PVE Wiki HERE please take a look and provide any feedback for improvements! Thanks everyone for your help!!
  9. P

    Intel mfsys25 multipath configuration

    SOLVED: Added HOW-TO to WIKI I created a Multi-Path How-to specific for the INTEL MFSYS25/35 on the PVE Wiki HERE please take a look and provide any feedback for improvements! Thanks everyone for your help!!
  10. P

    Intel Modular Server System MFSYS25 Installation Experiences

    SOLVED: Added HOW-TO to WIKI I created a Multi-Path How-to specific for the INTEL MFSYS25/35 on the PVE Wiki HERE please take a look and provide any feedback for improvements! Thanks everyone for your help!!
  11. P

    mfsys35 multipath config

    SOLVED: Added HOW-TO to WIKI I created a Multi-Path How-to specific for the INTEL MFSYS25/35 on the PVE Wiki HERE please take a look and provide any feedback for improvements! Thanks everyone for your help!!
  12. P

    mfsys35 multipath config

    Updated links to grub packages in case anyone needs them: wget http://ftp.us.debian.org/debian/pool/main/e/eglibc/multiarch-support_2.13-38_amd64.deb wget http://ftp.us.debian.org/debian/pool/main/x/xz-utils/liblzma5_5.1.1alpha+20120614-2_amd64.deb wget...
  13. P

    mfsys35 multipath config

    OK I figured it out the new fstab now looks like this: # <file system> <mount point> <type> <options> <dump> <pass> /dev/pve/root / ext3 errors=remount-ro 0 1 /dev/pve/data /var/lib/vz ext3 defaults 0 1 #UUID=294b7d72-4dea-4549-97c9-4320a55f3fb5 /boot ext3 defaults 0 1...
  14. P

    mfsys35 multipath config

    OK so my /etc/fstab currently looks like this # <file system> <mount point> <type> <options> <dump> <pass> /dev/pve/root / ext3 errors=remount-ro 0 1 /dev/pve/data /var/lib/vz ext3 defaults 0 1 UUID=294b7d72-4dea-4549-97c9-4320a55f3fb5 /boot ext3 defaults 0 1 /dev/pve/swap none swap sw 0 0...
  15. P

    mfsys35 multipath config

    Ok I think I fixed the grub-legacy error, I had to do a and re-install grub2-common and grub-pc now I don't have any errors.
  16. P

    mfsys35 multipath config

    Thanks Tozz.. after I posted I figured as much.. otherwise how could the other storage controller see the vmdisks drive! Did you get this error: Errors were encountered while processing: grub-legacy ? see post #15
  17. P

    mfsys35 multipath config

    Is there a difference between the "legacy" one vs the non legacy package.. which is at 097.64 I am asking because when Install the packages I get the following error: OK thanks!
  18. P

    Hi Alex, I see you were able to do it. Sorry I did not reply, I am not getting update emails...

    Hi Alex, I see you were able to do it. Sorry I did not reply, I am not getting update emails from this forum anymore for some reason. I am currently working on this using: http://forum.proxmox.com/threads/8123-mfsys35-multipath-config
  19. P

    mfsys35 multipath config

    I have three disks assigned to a blade: sda - root and boot partition, some local storage for containers sdb - vmdisks raw storage LVM group for Virtual KVM disks sdc - vzdumps, templates, iso image shared via nfs with other PVE hosts in cluster. I can see how to add sda and sdc to the...
  20. P

    mfsys35 multipath config

    Thanks for your answers Tozz!! I am updating the links to the packages and cannot find http://ftp.de.debian.org/debian/pool/main/g/grub/grub_0.97-66_amd64.deb or better. I do see this package: http://ftp.de.debian.org/debian/pool/main/g/grub/grub-legacy_0.97-67_amd64.deb Do you know if...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!