Hallo,
Ich habe vor kurzem 2 host mit proxmox 7.x aktualisiert auf proxmox 8.1.3 das hat auch soweit gut geklappt.
Jetzt habe ich festgestellt das seit genau dem Update die CPU Last bei 3 iobroker VMs um 20% höher ist, wenn ein proxmox Backup gefahren wurde.
alles läuft normal iobroker VM...
Muss das unter vmbr0 oder unter eno1
auto lo
iface lo inet loopback
iface eno1 inet manual
offload-gso off
offload-gro off
offload-tso off
offload-rx off
offload-tx off
offload-rxvlan off
offload-txvlan off
offload-sg off
offload-ufo off
offload-lro off
auto vmbr0
iface...
Hallo,
ich habe das Problem das meine iobroker VM gelegentlich die Verbindung verliert. Immer wenn das passiert sind sehr viele kernel Einträge im syslog von proxmox.
Leider verstehe ich diese nicht wirklich, ich vermute ein Treiber Problem. Ist das bekannt, oder gibt es sogar ein workaround...
@Leon Gaultier
Danke für deine Antwort. Wie genau schreibt man den bootloader und die gpt Tabelle neu? Wäre dir sehr dankbar wenn du darauf nochmal eingehen könntest :)
Hallo,
in meinem NUC wird die 120GB SSD langsam aber sicher zu klein. Ich würde gerne eine 500GB SSD verwenden. Wie gehe ich beim Wechsel am sinnvollsten vor?
Kann ich die SSD mit einem Adapter an mein Laptop anschließen und z.B. mit clonezilla die alte SSD auf die neue clonen? Und weiter...
Hallo,
Bei meinem NUC gehen mir langsam die 8GB RAM aus.
Wenn ich den RAM um 8GB erweitere, wird dies dann automatisch erkannt von proxmox das jetzt 16GB zu Verfügung stehen?
I tested it, unfortunately it was not the cause. Nevertheless, thanks for the tip.
The funny thing is that if I keep typing on the touch screen at frequent intervals, it works for a longer time too. As soon as I do not enter anything for about 45-60 seconds, the touch function does not work...
I installed proxmox on a NUC8I3BEK and created a win10 per VM.
Now I connected my touch screen via usb, the usb port was of course passed.
However, the touch function only works for about 1 minute after which no input is possible. If I deactivate the "HID Compliant Touchscreen" driver in the...
Der Kundendienst vom Touchscreenhersteller hat mich jetzt auf die Seite von eeti (http://www.eeti.com.tw/drivers_Win.html) verwiesen.
Dort habe ich einen Treiber runtergeladen und in einem info PDF stand folgendes:
Der serielle Touchscreen funktioniert möglicherweise aufgrund einer virtuellen...
@janosch1337
Ich habe jetzt Methode 1 und 3 nach dieser Anleitung gemacht leider habe ich das Problem immer noch.
https://www.google.de/amp/s/de.drivereasy.com/wissen/gelost-usb-port-funktioniert-nicht-unter-windows-10/amp/
Im Internet ließt man sehr viel über usb port Probleme mit Win 10...
Hallo,
ich habe eine Win10 VM auf einem NUC8I3BEK erstellt und verschiedene USB-Ports durchgereicht. Es funktionieren eine USB Grafikkarte eine Funk und Kabelmaus ohne Probleme.
Leider habe ich aber ein großes Problem mit der Touchfunktion eines Touchscreens (dieser funktioniert an einem...
Good Morning,
does any one of you have an idea? I found the following:
LAN enabled and WLAN disabled:
LAN: NUC8i3 -> Powerline -> Fritzbox 7490 192.168.178.110 1C: 69: 7A: 02: 61: 91
LAN and WLAN enabled:
LAN: NUC8i3 -> Powerline -> Fritzbox 7490 192.168.178.104 1C: 69: 7A: 02: 61: 91...
Hello,
I want to use proxmox over wlan on a NUC8i3. How do I have to configure the file interfaces for this to work?
With this interfaces file I have access via LAN (192.168.178.110) and via WLAN (192.168.178.104) to the proxmox web interface. But if I unplug the LAN plug then proxmox is no...
@wolfgang
Wenn ich so wie du gesagt hast bridge-ports auf none stelle, habe ich weder über LAN noch über WLAN zugriff. Laut fritzbox bin ich über WLAN weiterhin mit der IP 192.168.178.104 verbunden. Aus der normalen LAN IP 192.168.178.110 wird die 99 am Schluss. Das funktioniert aber auch...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.