Search results

  1. D

    [SOLVED] TASK ERROR: IOMMU not present adding two port nic to VM

    OK so i took the card out and found that it has the SAME NAME AS MY ONBOARD LAN. Because I have a poweredge I have 2 onboard Lans already. So it came down to the fact I picked the wrong one. I would recommend anyone that tries to do this write down your PCI device ID's for your current NIC's...
  2. D

    [SOLVED] TASK ERROR: IOMMU not present adding two port nic to VM

    that is correct! i need the two ports for WAN/Lan for the pfsense
  3. D

    [SOLVED] TASK ERROR: IOMMU not present adding two port nic to VM

    im about at my wits end here guys. Here are some outputs. root@pve7:~# dmesg | grep -i vfio [ 10.533481] VFIO - User Level meta-driver version: 0.3 root@pve7:~# find /sys/kernel/iommu_groups/ -type l | grep 01:00 /sys/kernel/iommu_groups/16/devices/0000:01:00.0...
  4. D

    [SOLVED] TASK ERROR: IOMMU not present adding two port nic to VM

    Im not out of the woods yet BUT i fixed most of my issues (https://pve.proxmox.com/wiki/Pci_passthrough#Enable_the_IOMMU) as per that doc i needed to add iommu=pt to the grub entry and did this "echo "options vfio_iommu_type1 allow_unsafe_interrupts=1" >...
  5. D

    [SOLVED] TASK ERROR: IOMMU not present adding two port nic to VM

    So i am trying to load pfSense on a VM and do a PCI passthrough for the nic. I am on 7.x i followed these steps to enable Dells version of IOMMU https://www.dell.com/support/kbdoc/en-us/000144029/enabling-sr-iov-technology-on-dell-poweredge-servers then followed...
  6. D

    Is it possible to make a shared folder in 5.3

    can i deploy at NFS server as a VM or does it have to be physical?
  7. D

    Very Slow VMs on 5.3

    i have one USB drive with 4 HD's in it that is currently not plugged in at the moment but here is the logs once I did the reboot. do you think that maybe I made the Zpool wrong?
  8. D

    Very Slow VMs on 5.3

    ok they are attached.
  9. D

    Very Slow VMs on 5.3

    how would I do that?
  10. D

    Very Slow VMs on 5.3

    Hello All, I am not sure what I am doing wrong. But I have tried to build 3 different vm's all of which use very little resources but each time I build a VM it takes over 15 mins to boot, and hours to install. Now to be very clear when I am doing the install no other VMs are on at the time...
  11. D

    Is it possible to make a shared folder in 5.3

    Hey guys, Just so you know I am coming from using VMware. So I am trying to see if there is similar functionality here. If not, that isn't a big deal. So this is what I am looking for. On my VMware setup I had one server (vm) that was VPN box that shared a folder (or hard drive) that to a...
  12. D

    High memory usage on 5.3

    Yes I do run ZFS. So would it be easier to buy a hardware raid controller and use it?
  13. D

    High memory usage on 5.3

    Hello All, My latest thing I see is the very high memory usage on my Proxmox box. I am running 2 linux vm's with memory ballooning turned on. One is set to 512 to balloon up to 2gb <- this vm has a usb drive emulation turned on and the other is set to 256mb to balloon up to 1gb When I do a...
  14. D

    New to ZFS and Proxmox

    and just like that, it's working again! Thanks guys. You made a old man happy!
  15. D

    New to ZFS and Proxmox

    great scott.... now that i got the Dir's online and i moved my VMs to the new dir. I get the following error. kvm: -drive file=/deadpool/VMs/images/100/vm-100-disk-0.qcow2,if=none,id=drive-scsi0,format=qcow2,cache=none,aio=native,detect-zeroes=on: file system may not support O_DIRECT kvm...
  16. D

    New to ZFS and Proxmox

    figured it out. thanks for pointing me in the right direction!!!!
  17. D

    New to ZFS and Proxmox

    Hey guys. Firstly this is an amazing hypervisor. But i think my understanding of linux is a bit dated. Here is what I have.... I have a OpenMediaVault server that is going to be a Proxmox server that will host OpenMediaVault as a VM. What I am trying to do... ZFS RAID0 two 1tb HDs to hold VM...
  18. D

    Adding USB RAID to Proxmox 5.3

    that sounds like what i need to do. How do I do that?
  19. D

    Adding USB RAID to Proxmox 5.3

    Hello All, Let me explain what I am trying to do. I have been using my server to do my media services. This box is a 8 core AMD, 36gb RAM machine that has a USB raid on it. Currently I am running OpenMediaVault as its default OS. What I am trying to do is covert this box to a Proxmox 5.3 box...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!