Search results

  1. M

    Console Error VE 6.0

    This relatively a new server as well new ssd. Do you think the I/o error is a sign that this server hardware is no good?
  2. M

    Console Error VE 6.0

    Just fired up a new box I got and put 6.0 on it. I see the attached screen shot at console. Any ideas what this looks like to be?
  3. M

    BNX2 Error Randomly at Console

    I get the below error randomly at times at console, the LAN connection to the Proxmox box works perfectly fine. bnx2 en01 Copper Link is down Check connections, they are solid Tried different cat 5 cable as well. Any ideas?
  4. M

    Proxmox install on new server

    I read somewhere that proxmox does a lot of read/write....I was initially was thinking a USB but decided against it.
  5. M

    Proxmox install on new server

    I had a Kingston SSD in one for a test and after a few months noticed the wearout on the disk tab was slowly creeping up and up.
  6. M

    Proxmox install on new server

    Hello, I am getting a new server to host Proxmox and wanted to know of any recommendations on SSD for the host? I know I can get a consumer grade SSD for pretty cheap, but not sure of any concerns or the long run and crashing. Any input is appreciated.
  7. M

    Backup

    ok. When I try to create a directory it says no disk unused.. I assume I will have to delete the LVM thin created that will free up that HD....I can't find an option to delete it.
  8. M

    Backup

    So I created the drive as a LVM thin, where do I find the option to do that? I named it backup when I created it.
  9. M

    Backup

    Hello, I am still learning Proxmox but I would like to do the following: I have two SSDs which are not the same size hard drives. I would like to have auto backup saved on a different hard drive instead of the local in case of proxmox failure for whatever reason. This way I can just restore...
  10. M

    Unable to get updates on PVE 5.3

    Hello, I reinstalled proxmox on a new box with 5.3 and I unable to get updates, get the below...any ideas/ Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@ProxmoxVE:~# apt-get update Ign:1 http://ftp.us.debian.org/debian stretch InRelease...
  11. M

    Motherboard Compatibility

    did run it, no issues
  12. M

    Motherboard Compatibility

    Motherboard: X11SSL-F CPU: Intel Xeon X3-1270 v5 Memory: Crucial CT16G4WFD824A (2x) Hard Drive: Seagate ST2000LM015 Network card: AOC-SGP-I4
  13. M

    Motherboard Compatibility

    Hello, I had my promox setup right fine for a few weeks and ultimately it crashed with the below error. Tried RAM, HD etc...Even sent the server back to the manufacturer for testing. They stated everything is working and that it was a hardware/software compatibility issue. I also tried...
  14. M

    Memory Issue

    Hmm makes sense...its the same reporting that opnsense's UI was reporting....Guess nothing to be alarmed about :-)
  15. M

    Memory Issue

    Anyone seeing any memory reporting issue in promox? My opnsense vm shows that its being utilized at 60% and the opnsense ui is only showing 6%. I gave the VM 16gb of ram.
  16. M

    Unable to access Proxmox Console

    Hello, I setup opnsense on a VM and thought I statically assigned Proxmox a IP address in my domain. When the system boots it does show that IP address however I am unable to get to the web console via the setup opnsense lan. Pinging it via Opnsense command line and even plugging directly...
  17. M

    Setup Question with Pfsense

    I am looking to install pfsense on proxmox. According to the guide I should keep VMBR0 as the proxmox management, VMBR1 WAN, VMBR2 as LAN. I have 6 NIC cards to spare, not an issue. My question is how do I bridge the proxmox VMBR0 so that I can access the GUI from my LAN? I will be assigning...
  18. M

    Setting Up Proxmox

    I've got everything running so far with the below setup. Only issue I seem to be having is when I reboot the appliance for whatever reason, the untangle looses the WAN IP address....renewing it's DHCP lease does not work. Physically unplugging the cable, reconnecting, and the renewing works.
  19. M

    Downloading templates

    Do I need to assign Proxmox with its own NIC card to access the internet?
  20. M

    Downloading templates

    I am trying to create a container and tried to download a ubuntu template and I get the below message: starting template download from: http://download.proxmox.com/images/system/ubuntu-17.04-standard_17.04-1_amd64.tar.gz target file...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!