When I had Proxmox 7.x, I also used Wireguard in LXC. I always set it accordingly. In the summer of 2023, I switched to Proxmox 8.x and forgot to do this setting, and Wireguard still works in LXC. Is it necessary to do this setting only for OpenVPN, or also for Wireguard? Someone answered on...
Until now I was running on Proxmox 7.3-4 and today I installed a clean Proxmox 8.0.3. Everything works great, VM and LXC are running.
There are 2 data SSDs in the system on which ZFS Mirror was installed.
zpool import
pool: datapool
id: 5891050705304534901
state: ONLINE
status: The...
I recently saw this procedure as a way to reduce electricity consumption.
I set it up the way the guy describes it
echo "powersave" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
It is set from 7:00, see graph.
The CPU increased from 2% to 4%, but the total consumption decreased by...
In Proxmox I created from 4x 18TB HDD Raidz (52TB). Then I created a 12 TB zvol and assigned it to VM (Debian). In my debian, I formatted the disc to ext4 and everything works well.
I have some data on the 12 TB section. Now I would like to increase the section to 16TB. Is it possible without...
I have only one node that is not connected to the cluster.
I followed the instructions
I set a new name in
nano /etc/hosts
nano /etc/hostname
nano /etc/postfix/main.cf
reboot
Next, through the MC, I entered the /etc/pve/nodes/ but copy (F5) didn't work. In the proxmox web interface, I saw...
I installed proxmox 7.3 today. During installation, proxmox received an IP address from the DHCP server 192.168.1.19 (GW 192.168.1.1, DNS 192.168.1.1). I immediately updated proxmox.
Then I edited the network configuration file. I changed the proxmox IP address to 192.168.1.3. I changed the...
PVE 7.1-10
I created LXC (debian 11) and am currently installing wireguard. The installation will end fine, but I can see during the installation. That's all right ?
update-initramfs: Generating /boot/initrd.img-5.10.0-12-rt-amd64
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8125b-2.fw...
Today I switched from proxmox 6 to proxmox 7 and see if everything works so far.
My old proxmox 6 had 2x SSD (patriot 256GB) ZFS mirror.
I built the new proxmox 7.1 on the same HW, but I used 2x SSD (samsung 250GB).
My old proxmox 6 used static IP 192.168.1.3.
The new proxmox uses the same IP...
A year ago I created a datapool pool (SSD 1TB).
pool: datapool
state: ONLINE
scan: scrub repaired 0B in 00:00:00 with 0 errors on Sun Jan 9 00:24:01 2022
config:
NAME STATE READ WRITE CKSUM
datapool...
Today I found out that I have a problem with one ssd.
Is it possible to fix it or do I need to replace the SSD?
zpool status
pool: rpool
state: DEGRADED
status: One or more devices are faulted in response to persistent errors.
Sufficient replicas exist for the pool to continue...
I am using Proxmox 6.4 and would like to install LXC debian 11 but this template is not yet available. It says that Debian 11 can be installed manually.
I downloaded this rootfs and created lxc. LXC works, but I had to install some basic packages, e.g. nano, openssh etc.
When Proxmox adds a...
I currently use Proxmox 6.3.-4.
One LXC is used for websites (debian 9 LAMP).
I mainly run nextcloud 17 (wp, joomla, etc.)
Now I would like to install the new LXC debian 10 and nextcloudhub + onlyoffice (I want to cancel the old nextcloud then).
I've read a lot about privileged LXCs being very...
I am currently using proxmox. I have it all installed on 1x SSD EXT4.
proxmox-ve: 5.4-2 (running kernel: 4.15.18-26-pve)
pve-manager: 5.4-13 (running version: 5.4-13/aee6f0ec)
pve-kernel-4.15: 5.4-14
pve-kernel-4.15.18-26-pve: 4.15.18-54
pve-kernel-4.15.18-25-pve: 4.15.18-53...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.