Search results

excellent , steps provided really helpful , after that I also did systemctl unmask pve-firewall.service systemctl start pve-firewall.service which help me to start all the services and now I can get in webgui. really appreciate your help and efforts cheers :) Thanks Upendra

yes I did , looks like some of command not working , Not sure but some one might tried to upgrade here is the output # systemctl start pvedaemon.service Failed to start pvedaemon.service: Unit pvedaemon.service is masked. what could be done to make GUI working. Thanks Upendra

Hi,suddenly for one of my proxmox I am not able to access it thr WebGui, I can do a ssh all working fine except WebGui, pveversion shows below pve-manager/4.4-5/c43015a5 (running kernel: 4.4.35-2-pve) nothing much we changed on this box still strange it lost webgui , any suggestions. Thanks...

sorry for late reply, I did add it from command line and did reboot

Hi, below is my network config auto lo iface lo inet loopback iface eth0 inet manual iface eth1 inet manual auto vmbr0 iface vmbr0 inet static address 172.16.28.8 netmask 255.255.255.0 gateway 172.16.28.1 bridge_ports eth0 bridge_stp off...

I need to test few things with the VM running on proxmox with .raw format to ESX with vmdk files , so just looking for any convert tool

Hi, is there any better way to covert .raw files to .vmdk ? it works only if we have on single .raw file however if its more than one converted VMDK VM's didn't find the boot device I have tried to merge multiple .raw files in to single file and then did the conversion however no luck. thanks...

Hi we have few proxmox which are pending for upgrades, what will be the best approach to upgrade from 3.2 to latest release. we also have some of them since 2.x release. are they specific steps needs to perform to bring them up to date. Thanks Upendra

once I changed it to Actiive- backup its worked , just trying to have load balancing to help VM's to boost network performance. so if I have two NIC can't use them as bonding balance-rr if I need to use Bridge. if I use only Bonding there is no way to use bridge. any alternative we can...

Thanks for reply, I will search for caching option which is new for me. however currently I am running 256 GB server having at least 40-50 VM running on it

Thanks for reply, However now the issues is I am not able to get the DHCP IP from my corp network, I can only able to ping host ( proxmox IP) anything specifically need to be done ?

Hi, earlier we were using Bridge mode to use corp DHCP for VM's everything working fine now as each my server has two ether net card , planned to use as load balancing balance-br or alb now 1st problem if I use only bonding I can't use bridge mode in GUI and have to use NAT mode for my...

I agree with you , however I am not sure in terms of proxmox configuration. does equal amount of RAM should be good ?

Hi, my server config 1) 2TB x 10 HW RAID 5 configured and 1 RAID 0 for OS 2) created a entire 16 TB volume as /dev/sbd once the PE 4.3 installed followed the below steps pvcreate /dev/sda3 /dev/sdb 4 vgextend pve /dev/sdb 5 lvextend -L +16400G /dev/pve/data as a result entire 16 TB...

Hi below is my pveperf output :~# pveperf CPU BOGOMIPS: 63995.16 REGEX/SECOND: 1149466 HD SIZE: 94.37 GB (/dev/dm-0) BUFFERED READS: 120.05 MB/sec AVERAGE SEEK TIME: 10.69 ms FSYNCS/SECOND: 44.71 DNS EXT: 451.29 ms DNS INT: 0.91 ms as I am new...

Hi, we have physical server per bellow specs 1) two 8 core socket CPU 2) 256 or 128 GB ram 3) 2Tb x 8-10 SATA HDD I am just trying to understand what will be the best size of swap file , if I want to run 50 VM at a time. should I create a separate swap or leave to OS to define the size while...

Guys, how can we link 3 ethernet to do a bridge to share the load and can also act as failover ? current configuration is auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address 192.168.30.13 netmask 255.255.0.0 gateway 192.168.5.1...

Thanks for answer.

Thanks for reply. I am not planning for migration , there is no cluster at all. All my servers are running as a single node however I am trying to make them optimize in performance.

Hi, again I am still learning the Proxmox , is there any way we can automate Proxmox backups from command line like cron jobs ? and point them to some another location for a fail safe, other way is there any way like other technologies where we can do a replication for critical VM's between...