Search results

  1. K

    NFS Multipath (or at least failover)

    Hi Alwin, please correct if I'm wrong but the document you linked to does not explain how to set up multipath NFS. If I understand correctly, this must be done on the OS, much like you would to when implementing multipath iSCSI. I would really appreciate if you could give us some hint on how...
  2. K

    NFS Multipath (or at least failover)

    Hello, I'm reading that someone in the community does use NFS 4.1 with multipath, so I've tried configuring it but altought I can choose 4.1 or 4.2 as version, I can only select a single IP address. Could someone kindly explain how can I set this up? Thank you!
  3. K

    Timeout GUI 5.4

    Unfortunately I don't know how to help because I solved my problem reinstalling PVE. I would suggest to check that the server has the correct time settings, but in my case they were correct.
  4. K

    Timeout GUI 5.4

    Problem solved upon reinstallation of the PVE server (same version).
  5. K

    Timeout GUI 5.4

    No sorry, I meant it as "idle timeout". I can work properly for like five minutes, but then even if I'm doing stuff it asks me again to log in. I'm not using any particular auth method, infact I just deployed this new server a week ago.
  6. K

    Timeout GUI 5.4

    Hello, I'm having this problem where the GUI times out in something like 5 minutes. I have tried different browsers and the proxmox date is correct. What should I check? Thank you
  7. K

    How to execute code whithin guest from the host

    I've installed PVE 5.4 on a test VM and indeed these commands do show up. I will schedule an update ASAP. Thank you!!
  8. K

    How to execute code whithin guest from the host

    Hi guys, thank you for the response. Is it possible that I cannot run any of these two commands with PVE 4.4-20? Maybe this version is too old?
  9. K

    How to execute code whithin guest from the host

    Hello, I have a simple question. Let's say I clone a VM. The clone will have the same network configuration of the original VM (I am not using DHCP). Now, is it possible to execute some kind of code inside proxmox to edit the /etc/network/interfaces file of the cloned guest? Thank you!
  10. K

    Guest with Fedora or Centos will not shutdown

    This is Fedora 28 actually, but I recall when I used Centos7, to have the same exact issue.
  11. K

    Guest with Fedora or Centos will not shutdown

    Ok, I belive this is due to Selinux... I will need to understand how to configure it properly to enable shutdown on the guest.
  12. K

    Guest with Fedora or Centos will not shutdown

    Hi Janos, I've looked at journalctl and indeed I got this message: qemu-ga[481]: info: guest-shutdown called, mode: (null) audit[483]: USER_AVC pid=483 uid=81 auid=4294967295 ses=4294967295 subj=system_u:system_r:system_dbusd_t:s0-s0:c0.c1023 msg='avc: denied { send_msg } for...
  13. K

    Guest with Fedora or Centos will not shutdown

    Hi Janos, I tried your test and it responded with an empty prompt, no error or no message whatsoever. Does it mean the communication is ok?
  14. K

    Guest with Fedora or Centos will not shutdown

    Hi all, I've noticed that I cannot gracefully power off any of my Centos 7 or Fedora 28 vm's with "right click -> Shutdown" from the WEB UI. If I do this, it's like I havent done anything and the VM just stays up. I've installed the Qemu drivers with "yum install qemu-guest-agent" and I've...
  15. K

    PVE suddently blocked WEB UI and SSH

    Hello, I would like to report a problem I just had this morning. Without any human intervention, it seems like the integrated firewall of PVE has started blocking any request even from hosts in the same subnet. Meanwile, every VM was working properly at this time. I was able to gain back access...
  16. K

    command IOTOP = ksoftirqd/0 99%

    pve-kernel-4.10.17-5-pve is not working for me. Still huge I/O waits. Have done regression to PVE 4.4 and will stay like this until the problem is solved...
  17. K

    NFS storage 'is not online'

    @Rodrigo Santin , are you using FreeNAS?
  18. K

    command IOTOP = ksoftirqd/0 99%

    Sorry for the delay. Hypervisor with the problem (PVE 5.1-36): root@hypve1:~# cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 22 0 0 0 0 0 0 0...
  19. K

    command IOTOP = ksoftirqd/0 99%

    I can verify if it has the ksoftirqd 99% problem, however could you guys please give me some details on what is needed to install a kernel and to say to the system that it has got to use this one?
  20. K

    command IOTOP = ksoftirqd/0 99%

    Hopefully proxmox team will address this problem. This is extremely frustrating :(

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!