Search results

Hi, I try to set up Verify Receivers to 450 or 550. But it will reject all mail. Oct 25 20:02:55 mg postfix/smtpd[271155]: connect from mail-yw1-f173.google.com[209.85.128.173] Oct 25 20:02:56 mg postfix/smtpd[271155]: NOQUEUE: reject: RCPT from mail-yw1-f173.google.com[209.85.128.173]: 450...

Hi, This is incoming log. Oct 24 14:18:10 mg1 postfix/smtpd[199672]: connect from unknown[43.133.213.179] Oct 24 14:18:10 mg1 postfix/smtpd[199672]: 861EFDB78: client=unknown[43.133.213.179] Oct 24 14:18:10 mg1 postfix/cleanup[199674]: 861EFDB78...

Hi, We have set up Reject unknown recipient. But someone keeps attempting to test accounts repeatedly, causing the postmaster to continuously respond with rejection emails. What are the ways to prevent such malicious attacks? Thanks

Hi, This is our proxmox mail gateway daliy report We have check Spam mails count at Spam Scores, but it's count seems not same. If I count score 3 - 10, the value is 290, but in daily report value is 285. Why report and Webgui values are different?

Hi, Yes, our mail server cannot set specify forwarding adderess only use internal address, so we tried setup in PMG. When we use forward rules, we cannot send mail outside, so we have diable this rule. This is forward rules setting. To Forward is "who subjects".

Hi Imanudin, Thank you for sharing the guide. But if we need outbound Disclaimer and external Disclaimer, this guide will be always at the top.

Hi, We need to allow users to set up automatic email forwarding to internal when they are on leave. However, we do not permit forwarding to external email addresses. In regular usage, forwarding to external addresses is allowed. I once attempted to initially block all forwarding and then...

Hi, this is my grub setting. GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet mitigations=off" #GRUB_CMDLINE_LINUX_DEFAULT="quiet mitigations=off pci=nomis" GRUB_CMDLINE_LINUX="root=ZFS=rpool/ROOT/pve-1 boot=zfs"...

You can use lxc.mount.entry edit /etc/pve/lxc/vid.conf lxc.mount.entry: <pve location> <lxc location> none bind,create=dir,optional 0 0

Hi, After upgrading to pve-kernel-5.15.102-1-pve I cannot boot server. I have tried pve-kernel-5.15.102-1-pve pve-kernel-5.19.17-2-pve pve-kernel-6.1.15-1-pve pve-kernel-6.2.2-1-pve pve-kernel-6.2.6-1-pve only pve-kernel-5.19.17-2-pve can boot into the server, but I still have another...

before install asterisk, shutdown container you need to disable all lxc apparmor security add this code at /etc/pve/lxc/<vid>.conf lxc.apparmor.profile: unconfined lxc.mount.auto: cgroup:rw lxc.mount.auto: proc:rw lxc.mount.auto: sys:rw

I made a stupid mistake. I just give pve openvswitch bridge ip, does not setting ovs intport. So I cannot add to cluster. When I setting ovs intport, I can add to cluster.

Hi, I have create cluster, but other pve server cannot add to my cluster. root@pve01:/var/lib/pve-cluster# pvecm status Quorum information ------------------ Date: Tue Feb 7 22:47:31 2017 Quorum provider: corosync_votequorum Nodes: 1 Node ID: 0x00000001 Ring...

I'm use ethtool to check that copper speed. And use cat 6, maybe I'll try cat 6a or cat 7. root@pve:~# ethtool eth3 Settings for eth3: Supported ports: [ TP ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame...

I have the same server, and I have to try it. When I just use eth3(10g ethernet port), I got the same speed(1Gbps) root@pve2:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet...

root@pve:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft...

And I have try to upgrade ixgbe driver, but upgrade failed. root@pve#apt-get install pve-kernel-4.4.35-1-pve pve-headers-4.4.35-1-pve root@pve#apt-get install gcc-4.9 make build-essential root@pve:/usr/local/src/ixgbe/ixgbe-4.5.4/src# make install make[1]: Entering directory...

Hi, I have connet X552 to DLINK DXS-1210-12TC. But that speed cannot to 10g speed. root@pve:/etc/network# lspci |grep Eth 03:00.0 Ethernet controller: Intel Corporation Ethernet Connection X552/X557-AT 10GBASE-T 03:00.1 Ethernet controller: Intel Corporation Ethernet Connection X552/X557-AT...

I don't have any error when starting. Just cannot see hostpci4 in my pfsense.

I have vm - pfsense, and I have passthrough PF & VF nic to vm. When I passthrough 4 nic, it's work. But I need to passthrough more VF to pfsense now. This is my vid.conf boot: cdn bootdisk: scsi0 cores: 2 cpu: host hostpci0: 03:00.1,pcie=1 hostpci1: 08:10.0,pcie=1 hostpci2: 08:10.1,pcie=1...