Search results

I have a new mail gateway running and notice that almost all mails arrive with links in the form page.link, e.g.: https://ifjuzcfj.page.link/bG1vcFmTTsSp18FC9 https://tasuulmw.page.link/1KxEGmkkbaGfvPaa8 https://dkrldfgl.page.link/11sFfZPAviB66TXP8 https://lajrahba.page.link/SwNfro99dBWPUeAp7...

Hallo Ich nutze auf vielen Servern rspamd und habe über die Jahre perfekte Listen erstellt. Nun habe ich einen alten MTA welcher kein Milter kann und vor diesen ein Mail Gateway gesetzt. In einer Stunde sind tausende Mails in der Quarantäne gelandet, um diese zu reduzieren möchte ich meine...

Den Regex habe ich angepasst nach dem nun auch "r_ezeptfrei" auftaucht, neu sieht er so aus: ".*r[\\._:\\-]?e[\\._:\\-]?z[\\._:\\-]?e[\\._:\\-]?p[\\._:\\-]?t[\\._:\\-]?f[\\._:\\-]?r[\\._:\\-]?e[\\._:\\-]?i.*" Akzeptiert nun Bindestriche, Unterstriche, Doppelpunkte oder Punkte als Trennzeichen...

Same here, but I would like to use 2FA auth. How can VE backup to PBS with activated 2FA? Same happens on sync from PBS <-> PBS

Thanks for the tip with the datasets, it tooks 15 days to move all the data, now it is clear why SSDs are recommended.

Wie muss ein solcher Sync Job konfiguriert werden? Mein System muss noch garbage collection ausführen, werden mit einem Sync Job auch die zu löschenden Teile synchronisiert?

Hello I use proxmox backup server on one of my servers which also holds other backups, created with rsync on the backup pool partition. Because I’ve only 4 usable slots on this server I must use the same zfs storage for all backups. If I now run GC I got an error “TASK ERROR: cannot continue...

ok it happens now again, here the output from the host while the problem exists: root@pm:~# free -h total used free shared buffers cached Mem: 125G 123G 2.3G 502M 1.3G 104G -/+ buffers/cache: 17G 108G Swap...

Nope, but the other guy seams to have exactly the same problem, he uses S-ATA, I use only SAS and SSD's. Today I had two times to “drop_caches”, this drives me crazy, thinking about to switch back to the old hardware. On the other post I read that may be to much ram could be a problem, I've...

Hello, I've migrated my old proxmox server to a new system running on 4.4, the new system uses 2 raid 10 arrays, formated with xfs. I get many times a month: [11127866.527660] XFS: loop5(22218) possible memory allocation deadlock size 44960 in kmem_alloc (mode:0x2400240) As soon as I get...

Thanks Dietmar, the problem was solved with redownloading of the template and I also found out that in the old proxmox 3 templates the following lines must be removed to work in proxmox 4: GATEWAYDEV="venet0" NETWORKING_IPV6="yes" IPV6_DEFAULTDEV="venet0"

Hi all I've installed a new server for testing with proxmox 4 and imported my in proxmox 3 working centos7 templates. Creation of new containers works fine but the new container is not reachable from outside. Indside the container I can ping the other containers and the host and also the hosts...

Hi Udo Thanks, I didn't know that the snampshot has to be removed with lvremove, just did it. Here are the outputs: root@pm3:/mnt/backup-1# pvs PV VG Fmt Attr PSize PFree /dev/sda2 pve lvm2 a-- 110.32g 13.75g root@pm3:/mnt/backup-1# vgs VG #PV #LV #SN Attr VSize...

dmesg: megasas: 06.703.11.00 Mar. 27, 17:00:00 PDT 2014 megasas: 0x1000:0x0079:0x1014:0x03b2: bus 36:slot 0:func 0 megaraid_sas 0000:24:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 megaraid_sas 0000:24:00.0: setting latency timer to 64 megasas: FW now in Ready state alloc irq_desc for...

I’ve now rebooted my server, on startup I found this on the console: Buffer I/O error on device dm-5, logical block 14503920 Buffer I/O error on device dm-5, logical block 14503920 Buffer I/O error on device dm-5, logical block 14503934 Buffer I/O error on device dm-5, logical block...

Thanks Dietmar! I deleted this files: /dev/pve/vzsnap-pm3-0 /dev/mapper/pve-vzsnap--pm3--0 /dev/disk/by-id/dm-name-pve-vzsnap--pm3--0 /dev/disk/by-id/dm-uuid-LVM-pmLkYaq8onYG7zkPUhzHxZXc1mwyJvnywaO21v568C4VFdfYGv0TYMOe8B8fIEyK /dev/dm-5 Now pvscan looks much better root@pm3:/dev/disk/by-id#...

Hi, I've just run the update to upgrade to 3.4 and noticed some strange output: Installing for i386-pc platform. Installation finished. No error reported. Generating grub configuration file ... /dev/pve/vzsnap-pm3-0: read failed after 0 of 4096 at 59408056320: Input/output error...

Hello I've added an internal backup LAN to my proxmox hosts. Today I noticed that some console output are very very slow if the backup LAN is present (NIC eth1 UP) on the proxmox host. So I did some tests with traceroute and found out that the traffic flows over the internal backup LAN IP if...