I love Open Vswitch on my standalone and clustered Proxmox installations. My only annoyance is that I have to install with Linux bridges, get the machine online, perform an apt update, and install open vswitch, then reconfigure. I'm curious why OVS is not included in the installer? It's a...
Latest version of PVE. Installed Solaris 11 VM. If I max the number of sockets to 4 (proxmox max value), within the VM using "psrinfo -pv" or "mpstat" I can see the 4 processors appropriately. When adjusting the "cores" value, it has no effect on the number of CPUs within the VM. For...
Great info and example. Thanks!
Thanks!
One last question? Why did PVE6 not need "auto <interface>" or "auto <vlan id", while PVE7 does? Was this a change in the OVS config defaults? I looked at my old PVE6 OVS working config and it didn't have any "auto" except for on the loopback interface.
Yes, I stated that exactly in my previous post. My initial question was referring to the fact that they have had that package in the pve-no-subscription repository in the past, and now they don't. Why the change? The latter part of my question applies to that previous situation where/when the...
Curious as to why the openvswitch-switch repository location keeps going back and forth between debian & pve-no-subscription repos? If both repos are enabled, and the package exists in both, will an "apt install" grab from the pve repo rather than the debian? Or would you have to temporarily...
ok, I finally got it working. for others info.
On PVE7 the debian package openvswitch-switch is what you want. The package is not in the bullseye pve-no-subscription repository. Also, a change from PVE6 in the requirements in the OVS config. Before you did not need "auto <interface>", or...
Trying to get OVS working on PVE7. I saw former threads saying that the Openvswitch-switch package should be installed from the pve-no-subscription repository, but this is for older versions of PVE. I can't locate the package in the bullseye pve-no-subscription repo. Should I just be...
Thanks for your answers...
I realize this, but my question was about performance implications. To word it differently, once the crush/class rules are implemented, is a pool using the SSD class rule still limited by HDD OSD being in the ceph cluster? I would assume not, since they are isolated...
I have a 4-node PVE cluster with bonded 10gb NICs. Ceph storage is currently setup with 4 1TB SSD OSD's on each node.
I plan on adding at least 4 platter drives (10TB HDD) per node for larger storage. My plan was to edit the crush rule so that boot drive pools (ie. ceph-lxc, and ceph-vm)...
ZFS 0.8.0 has been released. Includes native encryption, ssd trim, directed I/O, sequential scrub and resilver, etc.
https://github.com/zfsonlinux/zfs/releases/tag/zfs-0.8.0
This is a pretty huge release. What's the normal turnaround time for a ZFS release to integrate into a Proxmox release?
Thought this sounded interesting...
http://www.phoronix.com/scan.php?page=news_item&px=MTQ2NDI
https://github.com/cloudius-systems/osv/wiki/Running-OSv-under-KVM-QEMU
Tried getting their qcow2 image running under proxmox but got stuck at "booting from hard disk..." prompt upon boot. Any...
This is the java error I'm getting....
java.net.MalformedURLException: unknown protocol: socket
at java.net.URL.<init>(Unknown Source)
at java.net.URL.<init>(Unknown Source)
at java.net.URL.<init>(Unknown Source)
at java.net.URI.toURL(Unknown Source)
at...
I currently use a dynamic port Socks5 SSH tunnel in putty to remotely access my home network via my home gateway router. Within the Chrome browser I use proxy-switchysharp to toggle back and forth between "Direct Connection" and using the Socks5 proxy home. Every web interface I use (multiple...
Re: Console Performance Help: Putty SSH Tunnel seems to cause VNC cosole refresh iss
I know this is an old post, but I'm using the same solution as listed above and figured I'd add to it.
If you have control over the router/gateway at the proxmox server location, you might try giving QOS...
Just curious if anyone else has been having web gui login problems on 2.3 due to browser caching issues. On both Chrome & Firefox (latest as of post date) when I try to load the Proxmox Web GUI I get a blank white screen, no login prompt. Clearing cache works sporadically. Entering...
For Windows XP I tried all the registry settings and nothing was working, then I found the more obvious solution which may be affecting others.
Start -> Control Panel -> Power Options -> Power Buttons -> When I press the power button on my computer -> Shut Down
I set this myself as "Ask me...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.