Made vm1, added two NICs, eth0 bridged to vmbr0->host eth0, eth1 bridged to vmbr1 bridged to no physical eth (wanted internal only networking).
Made vm2 added one NIC bridged to vmbr1. I was able to network using vm1 as a gateway.
Used webUI to add vmbr1, used no IP address and no physical...
I agree with most of the views, the current interface is fine, however, this request seems perfectly reasonable. If you want more info, add the column, if you don't there is no change.
After reading through this, perhaps my statement about netbooks and console screen size are mis-spoken (see...
Yes, I was talking about that. So there is no way to set it in a config file? An annoyance, but not a deal breaker. I assume you have it set to 800x600? I do like 1024x768 myself (my desktop is 1400x900).
I think it is a mistake to set up a console access based off of a netbook. While...
How do I increase the resolution/size of the console window? I can't even run ifconfig and see the entire output at once. This would be useful as I plan on having internal only networked machines that I can not ssh into (directly). I have searched the forums but my search-foo must not be up...
no, no load. I have kvms running but they are not doing much. I thought I meant "Faster", however after looking at them again, I see I am doing more through put and I read the numbers backwards. So much for supporting my arguments for software raid!
Not a definitive answer but as I understand the parts, in a word, No.
In order to migrate vms from host to host AND have them work, the same networking has to be setup on each node and the nodes need to be able to access the masters. If you have networking so that the node can ping and resolve...
here is mine from a hardware raid 10 (adaptec controller) also a supermicro (2U):
CPU BOGOMIPS: 40403.67
REGEX/SECOND: 592889
HD SIZE: 94.49 GB (/dev/pve/root)
BUFFERED READS: 210.59 MB/sec
AVERAGE SEEK TIME: 14.87 ms
FSYNCS/SECOND: 503.83
DNS EXT: 181.26 ms...
Dietmar,
I have read your comments and the requests for mdadm in other posts. I thought I would add my two cents. In my past job I worked for a large OEM as a Linux support analyst for our enterprise customers. Almost all of them used mdadm instead of the onboard hardware raid provided or...
I have two more questions and my testing machines are limited to test on at this point:
1. can you set up vms on separate private networks inside of proxmox, something like:
____vmbr0---IP192.168.1.0/24--KVMs/VPSs
eth0-|
------vmbr1-----IP192.169.100.0/24--KVMs/VPSs
with...
When making KVMs there is a Virtio option for both HDs and NICs.
I am slightly aware of the KVM efforts to develop virtio devices.
1.What is your recommended device for a HD if the KVM is Linux and the recommended device for a NIC?
2. Same if question only running Windows.
That is what I thought as well. I have had issues on ONE test box. I think more testing on the newer socket MB is in order.
Thanks for the quick response.
We are using a vendor that has socket 1366 (Gainestown Xeon/Nehalem EP) platform with Intel 82574L/82576 NIC however, that NIC is not supported by the stock Debian kernel.
Currently we are using a MB with a socket 771 platform but our vendor tells us that is going away.
Does Proxmox support...
See the entry just above yours:
wget ftp://pve.proxmox.com/debian/dists/lenny/pvetest/binary-amd64/pve-kvm_86-2_amd64.deb
dpkg -i pve-kvm_86-2_amd64.deb
Looking through those links I found this:
http://git.kernel.org/?p=virt/kvm/qemu-kvm.git;a=commitdiff;h=8fa3b3ce6e
"KVM_GET_SUPPORTED_CPUID has been known to fail to return -E2BIG
when it runs out of entries. Detect this by always trying again
with a bigger table if the ioctl() fills the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.