Search results

I found that if I migrate the template from node 1 to node 2 I am able to clone to its local storage volume. So even though the template Virtual hard disks are stored on a NFS share that is accessible on all nodes I still have to migrate the template to said node I want to clone to.

The template vdisks are stored on a nfs share. All nodes have access and are able to clone. I cant do a full clone to the nodes storage disk though. It will only allow me to clone to the nfs share instead of each server. Thats what i am not understanding

I had the certs using the acme section They all got lost after joining to the cluster. Should i have done certs after joining the cluster?

I am trying to setup HTTPS Certs on a cluster of 6 nodes. Before I added them all to the cluster I had HTTPS certs working on all of them. After I added the servers to the cluster all but the first server lost the HTTPS certs. Am I supposed to only give 1 server HTTPS certs? Do I have to do...

I have 6 nodes in a cluster. Each node has a 128GB SSD Boot drive and a 2TB Raid 0 array for storing VMs and Containers. I have a VM template for Windows 10 that I want to be able to clone to all nodes. I see that I can select the storage volume that I have on node 1 but I can not select the...

root@pbs:~# grep IncludeConfig /etc/rsyslog.conf $IncludeConfig /etc/rsyslog.d/*.conf

Strange Adding it to /etc/rsyslog.conf does work but creating a config file at /etc/rsyslog.d/remote-logging.conf doesn't. Works fine on PVE but not on PBS. at least its working now. Thanks

No error. As far as i can tell it doesnt send the data over to my syslog server. Im under the assumption that pbs uses a different syslog service than pve.

How do I configure PBS to send it syslog to a remote server? I can't seem to get it working with rsyslog like I can with PVE.

Yes we have tried without the args. The nvidia gpu should not have a hardware problem. I had it working not to long ago. As for booting a live cd i cant do that right now. I reextrached the rom image from the card using nvflash as it is the only thing that seems to be able to extract it and...

adding hostpci0: 0000:03,pcie=1 just causes it to remove itself from the config. unless I did something wrong. Config looks like agent: 1 args: -cpu 'host,hv-vendor-id=linustorvaldswasright' bios: ovmf boot: order=sata2 cores: 4 cpu: host,hidden=1,flags=+pcid efidisk0...

Just Re-exported the BIOS of the card and also reboot the host with no VMs starting. Using cmp I compared the new rom with the old rom and they are 100% identical. Any other ideas?

I am using the AMD GPU for booting proxmox. We have had All functions enabled since the beginning. I tried changing the line in the qm.conf file and the issue i run into is that everytime I start the VM it works 1 time. turn the vm off and back on and nothing. it just does nothing. the GPU...

IOMMU group 0 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14] (rev 02) IOMMU group 10 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) IOMMU group 11 00:14.4 PCI...

This was the guide I used. (https://pve.proxmox.com/wiki/PCI(e)_Passthrough) Running the command you provided for the IOMMU groups provides zsh: parse error near `do' the Motherboard is an ASUS M5A99FX PRO R2.0 with an AMD FX 6300. The system has 2 GPUs. an AMD 5450 and the GT730. the 5450 is...

QM Config agent: 1 args: -cpu 'host,+kvm_pv_unhalt,+kvm_pv_eoi,hv_vendor_id=NV43FIX,kvm=off' bios: ovmf boot: order=sata0;net0;virtio0 cores: 4 cpu: host,hidden=1,flags=+pcid efidisk0: local:110/vm-110-disk-1.qcow2,size=128K hostpci0: 0000:03:00,pcie=1,romfile=GT730BIOS.rom machine: pc-q35-5.2...

So I am attempting to passthrough a GT 730 through to a QEMU VM. I followed the guide and got everything setup and its very weird. When the host boots I am able to start the VM but the graphics look broken. (Images) The drivers won't install and windows update driver says error 43. If you turn...