Search results

@mira, this seems logic to me. Moving storage is done with rsync, right? Is it possible to just copy the CT from HDD to SDD storage? without use of rsync and network? and use the full potential of the 8Gbps fiber channel instead. Best regards, Marco

Hi, Have this issue using 2 Proxmox servers with a qdevice setup Both Proxmox servers are connected throught 2x multipath 8Gbps fiber channels to Truenas Iscsi target (shared LVM) mpatha = HDD pool mpathb = SDD pool Both Proxmox servers are also direct connected to each other with a 10Gbps...

@fabian Is it possible to add "-av --progress" to the default /usr/share/perl5/PVE/VZDump/LXC.pm script or is there any other way to achieve the same output? So all LXC backups have this option enabled by default? or add a checkbox "show progress/debug" to the backup task in Proxmox GUI? Best...

I solved the issue for now, seems that proxmox is changing some settings in /etc/sysconfig/network-scripts/ifcfg-xxx files #nmcli Ipv4 is working on eth0 and eth1, ipv6 isn't working on eth2 and eth3. #nm-tui Setup all interfaces to manual configuration or disabled interface for ipv4 and...

When the CT is running, and I change the Mac addresses on the Proxmox Host GUI the ipv6 network is back up according to nmcli and eth 2 and eth3 can ping6 to ipv6.google.com. After reboot of the LXC CT nmcli shows for eth2 and eth3, and the ipv6 connection is gone. eth2: connecting (getting...

Hi, Thanks for your response.. Yes the firewall is enabled. containers are running Almalinux (migrated from Centos8) network is setup from within Proxmox Gui like screenshot below. Settings inside one of the LXC containers (masked ip-address and changed search domain) /etc/resolv.conf #...

Hi, I have the following problem on te latest proxmox version 7.2-4 I have lxc containers with ipv4 (eth0) and ipv6 (eth1) both bridged to vmbr0 Everytime when I reboot an lxc container the ipv6 isn't working inside the container, I need to manually remove the mac address from the network...

Just for a linux gameserver, I'm using together with my neightbours, I would like to separate the IP's one for internal an one external NAT/firewall. I understand this part, but I dont have the know how for the right commands (/etc/network/interfaces..... ip route add ....) Read: I tryed but...

Well I'm new to Proxmox using it about a half year now, before I used Openvz (venet) . I installed a test server with PVE6 and installed some LXC containers on it. I'm not so handy into routed setups, so I used Bridged setups, just for simplicity. Later on, some LXC containers needed an...

Okay, thanks! Well it seems to have worked before with this setup, until the recent update. here is the situation: Proxmox host. eno2 is on 192.168.3.0 subnet with ipv6 eno1 is on 192.168.2.0 subnet (vlan 3) vmbr0 linux bridge eno2 with IPv4 192.168.3.22 gateway 192.168.3.1 (for the GUI)...

Running latest Proxmox 7.0-10. When a lxc container has 2 interfaces (eth0 and eth1) with the same ipv4 gateway in GUI 192.168.2.1 GW 192.168.2.254 inside lxc ping succesfull 192.168.2.2 GW 192.168.2.254 inside lxc ping timeout the secondary interface isn't having outgoing traffic/ping. It...

We have finished a upgrade from PVE 6.4 to PVE 7.0 succesfully, after the update we would like to migrate some backups with rsync from old server lxc container to new server container.. (network is bridged to containers not routed) We created a ssh public key on old server #ssh-keygen...

@Dominic I've updated the forum post, can you help me with this issue?

netstat -s Ip: Forwarding: 2 9372408 total packets received 1129061 with invalid addresses 0 forwarded 0 incoming packets discarded 8957 incoming packets delivered 6850 requests sent out 55 outgoing packets dropped 42 dropped because of missing route...

Hello, I'm testing my first proxmox install, and I can't manage to get my network config right. Here's the current situation: Bridged setup ipv4 Gateway xxx.xxx.25.1 > eno2 > vmbr1 ipv4 Gateway xxx.xxx.31.1 > eno1 > vmbr0 ipv6 Gateway 2A00:xxxx:x:31::/64 > eno1 > vmbr0 Proxmox WEBGUI vmbr0...

Hello, I wonder if someone could help me finding the cause off our problem. I'm using the latest version of Proxmox. This is my situation: eno1 has ipv4 and ipv6 network eno2 has a different subnet ipv4 (vlan25 untagged on switch) vmbr0 > slave eno1 added IPv4 address 187.xx.31.xx/32 gateway...