Search results

Hello, @stefcntct :) I have 'solved' the issue by replacing the graphics card. It seems that the GT 710 chipset doesn't support UEFI. After I replaced the card with a Radeon W5500, I could install Proxmox without any issue. Regarding the Proxmox support guys reading it - as far as I...

Hello, everyone! Recently I have moved my Proxmox host from one office to another one. That move implied the changing of the network. Between the two moves, I have repeatedly tried to start the host, both by the normal boot process and using the Proxmox 'ZFS rescue boot' (by booting from a...

Thank you very much for your ideas, @mmenaz :) After I have connected to a working network and after some further trial & error steps, I managed to connect to the server and to change the IP. I still don't know why I couldn't connect to it before connecting to a network, but I'm glad that I...

Thank you very much for your suggestions, @mmenaz ! I will answer to each of them, onward. I also thought & hoped the same, but @oguz mentioned (in another thread) that the installer may not start / work properly without a network cable attached to the host. Moreover - even if the host would...

Hello, everyone! I have recently moved my Proxmox PC from the office where I've made the setup. As a consequence, the network where it was connected is no longer available. Today I tried to start the PC, without a network cable attached to it; the result - the boot process got stuck somewhere...

I found the issue - the graphics card was not UEFI compatible. After I replaced it, I installed Proxmox without any problems.

I have further tested and here are the results: I have tried with an attached network (LAN) cable - I got the same result, the installer seems to be rebooted after the DHCP stage. The graphical display keeps (sort of) trying to reconnect, but the installer is not resumed I have further tried to...

No, it is not connected. I will try with the server connected and let you know; I certainly hope that is the issue :) I have used Etcher, as I am using a MacOS system.

Hello, @oguz ! I have made several attempts to start the setup and the conclusions are: in UEFI mode - the result is the same: the installer starts, it displays a few lines and then, after the DHCP setup, the setup seems to be rebooted and the screen enters in a continuous restart loop in...

Of course :) I will try it and I will reply in this thread. Thank you very much!

@oguz - my apologies, I have written the version that I am using incorrectly - I am using version 6.2-1, not 6.1

Hello! Yes, I have downloaded the latest ISO from https://www.proxmox.com/en/downloads/item/proxmox-ve-6-2-iso-installer approximately two weeks ago. As the last update is displayed to be '12 May 2020', I presume it is the latest. Am I missing anything?

Hello! I want to install Proxmox 6.1 on a workstation and I have a problem with the starting of the setup process. I will describe onwards the hardware setup and the issue: Hardware: Motherboard: Asus ROG STRIX X570-I CPU: AMD Ryzen 9 3950X 3.5GHz RAM: 64GB Corsair Vengeance DDR4 3000MHz...