migration: network=10.10.10.102/24,type=secure
And yes all node can speak on the 10.10.10.X network
I actually avec 2 Network card per host
1 on the 10.25.X.X for local vlan/internet vlan
1 on the 10.10.10.X for CEPH + backup (this is a 10G network)
And both node do have CEPH configure so...
Here is pvecm status result
Cluster information
-------------------
Name: ncluster-2024
Config Version: 9
Transport: knet
Secure auth: on
Quorum information
------------------
Date: Thu May 2 14:10:51 2024
Quorum provider: corosync_votequorum
Nodes...
thank you for the idear, I did try the update certs, after that try to reboot node
still same issue
here is the complete error message
++
Host key verification failed.
TASK ERROR: command '/usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=hote806' root@10.25.0.106 pvecm mtunnel...
Good day
I run into a new issue and not sure how to handle it and I don't want to break something that work
I have a cluster with 7 nodes on Promox VE 8.1.10 with CEPH Storage
On my 5 firsts I can migrate VM from node to node no problem
But on the 2 last to Node I have added to the cluster I...
thank you for the answer I did find the backup Note option on PVE8, I dd manage to find my restore by going one by one, so once I will finish migrating all my VM from PVE6 to PVE8 I will have this new option, thank again
Good day
I had a few change over the time and it made the VM number of some VM change
So for exemple my vm #100 had an other number before (that I don't recall)
I'm using Proxmox backup 2.4-6
I would like to get an older backup (under the old VM number that I don't recall)
I was wondering if...
Good day,
I'm not 100% sure how to do this
We would like to do phising test
So we will have a few (2 or 3) source server that will send emails to all our users but we would like to have the mailgateway to let them go throu
I was reading the documentation regarding whitelisting but not sure how...
Thanks for the quick fallow up the reason for this is for a matter of SPF record, we are using PMG as mail filter for multiple domain (some are not event host in our premise but we use PMG to filter and then forward email to other servers) so daily spam reports are sent all over the place and...
Good day I would like to know if it's possible to specify a smtp server to be used by my PMG server when it send out daily reports, and other reports
Thank you
Daniel
Good day
Thank you for the quick fallow up
I have updated the promox backup server to 2.0-12
I have done a new backup of the same VM after the proxmox backup server update
I still have the same error when trying to do file restore
I have tryed directly from the VM/ BACKUP and from the storage...
Good day
I'm trying to do a single file restore but when trying to open Part 2 i get this error
proxmox-file-restore failed: Error: mounting 'drive-scsi0.img.fidx/part/["2"]' failed: all mounts failed or no supported file system (500)
The machine is a CentOS
Filesystem...
thank for the referal
since this file is non existing /etc/modprobe.d/zfs.conf
is it safe to just created with just this content
options zfs zfs_arc_max=8589934592
Good day, I'm not 100% sure how to fix this
I have install proxmoxVE on ZFS (2 x 1TB SSD in RAID1) with Proxmox installation CD, it installed grub in legacy/BIOS
Currently on version 6.3.6
I have 5 machine in cluster with 2 Machine with 64G RAM and the 3 other with 24
for example on Machine 1 I...
Thank you for all the information
I had the same issue, but since I had 2 WD Blue SSD same model in ZFS RAID 1 in the the same machine 1 was displaying 0% and the other 98% I was under the impression I had a deffective drive and I went throu the whole process of replacing 1 ZFS member.This was a...
thank you for the information, I think it would really be good idear to add domain wide rulesystem and be able to assign user on per domain range,
Because even within a single organisation you can have different person that manage different domain name
If you can maybe propose to development...
Good day
I have one of my customer help desk that want to manage white list and black list for his domain
So I have create WHO objects and rules as describe here https://forum.proxmox.com/threads/domain-wide-blacklist.75779/
I have also create a user with Help Desk role
But the user is not...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.