Search results

Anyone else seeing this amount of wear on ssd's? I have been running this node for about 2 years, with the drives that are in it. I was watching to see if they would withstand being used this way, because they are desktop drives, so I expected limits, but something has changed. Any way about a...

Can anyone see an issue with turning off the PBS when not in use? I would set the power state in the bios so it will turn on when power is returned. The sever would run a cron job to turn its self off and then the PDU would remove power. The power would be restored 1 hour before it is needed...

Does PBS support a physical Ubuntu 24.04 client backing up to it? Many thanks, the doc's state Debain, but this is an older version. I did read several old posts, but found no joy.

I tested an Opnsense firewall virtualized in Proxmox. The box has 1 gig nicks, but am unable to get speeds above 100mbps through it. Is there a max limit of bandwidth a vm/ct are allowed to use?

First off this is not talking about running backup server as a Proxmox vm/ct. I am evaluating this as a solution for a 1 pb storage cluster. The cluster will include 4 hp gen 10 servers. Each with 24 12tb drives. I need to know if the backup server can be installed across all 4 servers, to act...

Until this morning I had not had a need to do this, but now we do. Looks simple for Debian versions, I did not find anything when searching for Arch. Also would like to know how it handles multiple partitions and drives. Thank you,

Is there an easy way to change the CT ID on containers? I don't want to clone them to get them renumbered. Thanks,

I am getting the following error on a single CT. Just switched to Backup Server. Everything else seams ok so far. INFO: Starting Backup of VM 706 (lxc) INFO: Backup started at 2023-05-29 00:16:11 INFO: status = running INFO: CT Name: node006 INFO: including mount point rootfs ('/') in backup...

I had made a mistake with the creating a clone, so I hit the stop button. This ended up leaving two containers stuck with the lock symbol. To clear the locks, I edited the files under /etc/pve/lxc for the CT's. Deleteing the line "Lock: Drive" from the file. Don't leave a blank line. Once the...

Only error I found is the scrubs running. It keeps repeating the same for one node. Thanks for any thoughts. Error: 2023-02-01T18:09:19.419960-0700 mgr.Node-C (mgr.34310) 1363602 : cluster [DBG] pgmap v1363335: 513 pgs: 513 active+clean; 2.6 TiB data, 5.1 TiB used, 8.4 TiB / 14 TiB avail; 17...

I have a 4 node cluster and removed one today. Ceph took 4+ hours to sync up but now shows a health warning and still shows the node that was removed as a monitor. How do I get this cleaned up? Everything is running ok, so far.

Screwed up a cluster setup and want to change the ip used for the connection. Can I just edit this file to the correct ip? Not looking forward to reloading it. This is a new cluster so nothing lost yet.

So as you read I am kinda screwed. What I would like to know is if I reinstall on the new boot drives will it be able to read the data on the existing ZFS drives. Consisting of 12 drives and 2 SSD's? Boot drives are Raid1 on an HP raid controller. Storage are on a separate controller. I can...

Is it possible to use a usb drive to move CT's from a Proxmox 6.4-14 to a 7.1-12 version cluster via usb? I have tried it locally but the usb drive does not show the backups in the web interface on the 7.1-12 cluster. Though you can see the files in the cli on the server it is connected to...

I have no network connections to the host. However I can not find anything wrong with the network configuration. Host can not ping anything. Any idea's? Thanks.

Any idea why my CT's keep saying they have been migrated every 30-45 seconds? failed waiting for client: timed out TASK ERROR: command '/usr/bin/termproxy 5901 --path /vms/501 --perm VM.Console -- /usr/bin/dtach -A /var/run/dtach/vzctlconsole501 -r winch -z lxc-console -n 501 -e -1' failed...

extracting archive '/mnt/pve/NFS/dump/vzdump-lxc-100-2020_11_12-00_00_02.tar.lzo' tar: ./var/spool/postfix/dev/random: Cannot mknod: Operation not permitted tar: ./var/spool/postfix/dev/urandom: Cannot mknod: Operation not permitted Total bytes read: 4275230720 (4.0GiB, 120MiB/s) tar: Exiting...

What metric's do I look at to increase density. We are after the goal of 5-7 watts per container. with 120 CT's running right now we are at 18.33 watts per CT. Our largest expense is electricity so I am open to idea's. Currently the whole system slows down and clients complain if we go over 70...

is there a simple way to delete multiple containers? I have hundreds to remove.

I get the following when I try to run the upgrade. I do have a subscription and have removed the "no-subscription" from the confige but it still is looking for it. Get:97 https://download.proxmox.com/debian/pve buster/pve-no-subscription amd64 zfsutils-linux amd64 0.8.2-pve2 [355 kB] Fetched...