Search results for query: hba truenas passthrough

Welcome, @ssfbc2000 Have you checked https://pve.proxmox.com/pve-docs/chapter-qm.html#qm_pci_passthrough and https://forum.proxmox.com/search/9280634/?q=hba+truenas+passthrough&o=date or a similar search?

Hey All, totally new Non-subscription Proxmoxuser. Using Co-Pilot I have worked through various hardware, and software issues preventing installation. I have installed, successfully updated my Proxmox install, and I have initiated my first VM. I have not started the VM yet as I was instructed...

I am stuck in exactly the same place as you. Did you ever figure this out? I followed Jim's Garage YT tutorial and used OVMF as well because I also have a x4 SATA PCIe card I need to pass through. Any help would be appreciated.

Hi all, I moved my truenas scale drives from sata to a HBA controller flashed in IT Mode. on the proxmox: lspci -nn | grep LSI 01:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03) --- lsmod | grep vfio vfio_pci...

For me, it would be cheaper than having two physical computers. Currently I use four USB DAS with 5 bays in RAID 5: Three with five 6TB disks. One with five 12TB disks. With this computer using virtualization: 3x pool with 8 SAS disks in RAIDZ2 (using passthrough from the HBA card). VM...

Hi. I wanted to build two physical computers: one as a NAS using the TrueNAS and one as a desktop using the Windows. The files would be stored on the NAS. The desktop would be the main computer from which I would access the files on the NAS, where programs, games, ... would be installed. I...

This is my first experience with Proxmox. I am trying to use PCI passthrough on Proxmox for a PCI HBA card. My ultimate goal is a TrueNAS guest with a RAID-Z. The HBA card is in IT mode. I followed the passthrough guide on the wiki, and everything seemed to work fine until the very end. The...

Some more data points. b550/3700x NFS exports defined in a truenas vm NFS client was the pve host itself "cat /dev/random > filename.ext" in the exported folder to geneate nfs load Monitoring tn pool status with "zpool iostat 1" in the tn vm Installed prox 8.2 from scratch and retested.. same...

Hi all, I think I'm having the same problem. Proxmox 9.1.4 trying to install TrueNAS Scale 25.10.1. The install goes fine, I hit problems when it tries to boot into TrueNAS. When I use the OVMF Bios the system hangs during boot, it seems to hang right after scsi device discovery. This only...

Hi, I've recently upgraded from a 8300-8i to a 8600-24i, running proxmox 9.1.1, kernel 6.17.2-1-pve. First the good things: The card works without any issues and fully supports ASPM. I am able to reach even C10 without any issues (since this is a topic a lot of folks seem to be interested in)...

I have just bought an ASUS X299 Pro motherboard, which I’m planning to use to build a larger 24/7 Proxmox hypervisor as an upgrade from my current Dell OptiPlex 5080 SFF. I’m planning to run the following: OPNsense/pfSense with a NIC passthrough TrueNAS with SATA or HBA controller passthrough A...

Hey everyone, been running Proxmox in my homelab for a couple of years now and I love it. I recently upgraded my hardware from a 9th gen intel system to an AM5 AMD system and am in the process of migrating over. I have a Truenas VM running on my server with an HBA passed trough (I know not...

So for what it's worth, I recently migrated from Unraid to PVE w/ TrueNAS VM. I'm not sure I can be of much help, but maybe explaining my journey will help you a little... My old setup was bare metal Unraid w/ (3) 12TB HDDs in an XFS Unraid array and a 500Gb NVME as a cache drive. Hardware I...

HDD Passthrough Like i said.. worked for nearly a year now till 2-3 month ago

Hi everyone, I’m dealing with persistent I/O stalls in a setup where: Proxmox VE (host) runs TrueNAS SCALE as a VM The Proxmox host mounts NFS/SMB exports from the TrueNAS VM These mounts are bind-mounted into unprivileged LXC containers (Plex, Tdarr, TubeArchivist) Under heavier read/write...

Recently, I've been scavenging, and I picked up a computer setup to use for PVE . I plan to virtualize TrueNAS but have run into some issues. The HBA card simply cannot pass the hard drive information directly through to TrueNAS using the PCI Passthrough method. This also results in the...

This is the exact issue I am having. Fresh install of proxmox 9, joined to existing cluster - the other node was upgraded. I have decide to give it a go and install TrueNAS scale but wanted to ensure proxmox can run off of asmedia m.2 to 6 SATA mini-pcie card. MW-N100-NAS motherboard has 6 sata...

Sorry for the question: First of all, I'm really apologise for creating an additional thread on a proxmox system configuration. I know there are already many threads on this topic, and I definitely haven't read them all, but I can't decide what's best for my purposes. Perhaps your advice can...

Storage for the Proxmox server is two local fairly matched (Intel DC S3520 1.6TB, one DELL and one vanilla Intel) drives in a ZFS mirror, using SATA ports from the motherboard C232 chipset. The Nextcloud VM is an Ubuntu VM running Nextcloud AIO. The VM is allocated a 96GB VM disk from this...

You’re correct to be cautious here. If you import or use those pools directly on the Proxmox host, you won’t be able to safely passthrough the disks later and doing so could actually corrupt your existing data. In practice, this means those drives should be reserved solely for TrueNAS. The...