Search results

Hm, interesting, thanks for getting back so quick! What is the exact switch model that you currently use? Are there any known issues between the i225-LM, x520-da or x550-t2 NICs and the switch you have? What does ethtool tell you about the NIC?

Welcome to the Proxmox forum, rpierluigi! The options should still be preserved even after changing them through the web interface. This shouldn't be necessary, but if you want to make sure that there is no interference, you can always create an extra configuration file in...

Hi! Which kernel version are you using with these cards? Have you tried running other kernel versions? Could you provide a lspci -nnk of the network cards and if there's any interesting logs while these stutters persist in dmesg (e.g. dmesg | grep igb or dmesg | grep ixgbe)?

Hi! Currently, there is no option to add custom flags to the network device parameters. You could pass these via -args but bare in mind that the tap devices aren't created for them automatically, so they need to be set up manually or you could write a script that does that, but this is of...

In that case you really want to setup these firewall rules on the VNet bridge itself, i.e. you should create these rules in the Datacenter firewall as stated in the same paragraph ;)

Hi! If you want to setup SNAT and DHCP with the SDN, then you need to enable automatic DHCP in the dhcpsnat zone, make the VMs use the vnet1 bridge, and define a DHCP range in the VNet's subnet. There is a guide for this setup here [0]. [0]...

Hi! How did you setup the cloud init VM? Usually, cloud init VMs are expected to be used over a serial interface instead of a graphical display. Usually this is done by setting kernel parameters, e.g. providing the console parameter to the kernel. You can see the current kernel parameters in...

Hi! Thanks for reaching out, there's another user that seems to have similar problems [0]. It would be helpful to have more information, could you provide a boot log for the system? Does the NIC have the most recent firmware on it? [0] https://forum.proxmox.com/threads/167132/

Yes, some boot logs would be great to further investigate here what the problem is, so dmesg/journalctl, and optionally a lspci and ethtool output would be great. On another note, have you tried to upgrade the firmware for the BCM57416?

How did you make sure that the change did not take effect on the container? The container shares the host's kernel, so if the sysctl config has been set there, it is also set for the container. Either way, aren't there better defenses for these attacks then enlarging the receive buffer?

Hi! Does the error occur also for the first restart after the installation? The current ISO image does only ship the 6.8 kernel and as it's not a network installer, it is only designed to install packages which are shipped with the ISO image and doesn't have knowledge about other available...

FYI this can of course be any vmid, which isn't taken yet by another guest, so calling /cluster/nextid is what the web interface would also do to get the next free vmid when the Create Wizard is opened.

The error you described above should only happen if the bridge wasn't specified at all and the SDN is enabled. Could you try again with encoding the parameters in the URL?

Hi! Could you provide the complete API call that you make to the create_vm API endpoint? I suspect that the SDN is configured and one of the net* options is either malformed and therefore doesn't provide a correct bridge/vnet, but the whole API call provides more information to investigate here.

Hi! Are there any messages relevant to this in the syslog? Are there any errors when you open the Dev Tools (F12) when you're on one of the WebGUI in the browser? Have you tried restarting both the API server and its proxy (systemctl restart pvedaemon pveproxy)?

Hi! Yes, there is and the one you found is also the correct one! Suppose I want to import the virtual machine with the name TestVM from the ESXi storage esxistore to Proxmox VE on the local storage with vmid 404, then the command would need to be: qm import 404...

Hi! Another user posted that they fixed their problem by upgrading and resetting the BIOS settings to default [0]. On another note, I just want to point out that the Intel 13th and 14th 700 and 900 are affected by a hardware bug, which causes them to self-destroy by over-voltage of cores in...

Hi! You can add hook scripts to individual virtual machines [0], where the script then makes a request to the web hook target. [0] https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_hookscripts

Hi! The Proxmox VE installer is only capable of setting up a bridged network on the host with the management NIC as the bridge port. Any other network configurations have to be made manually afterwards, but this could be automated by running a first-boot script, which modifies the network...

Welcome to the Proxmox forum, Albertus! Thanks for using the Proxmox Datacenter Manager! Please open a feature enhancement request for this on our Bugzilla [0] as it's much easier to track and find there than in the community forum. As far as I could see there was no entry for this yet, but...