Search results

I have a local SATA drive that i use for transferring files between 2 VMs i have. I am not able to setup a network share since 1 is almost always on a VPN and the network doesnt play well. What i have done is i have the Drive on the Proxmox host. and i was able to grab it by-ID I am...

bbgeek17, Would you mind sharing your multipathd.conf for the pure storage? i am configuring one myself and multipath is not my strong suit. Thanks

VM 14023 add unreferenced volume 'local-lvm:vm-14023-disk-0' as 'unused0' to config that did the trick thanks!

That seemed to work out, and the hosts are back One issue it seems one of the VMs that was moving when this all triggered caused a disk to get stuck between local storage and the SAN its running on the SAN one but i cant remove the local one or migrate the machine because of it.

root@Proxmox03:~# cat /var/log/pve/tasks/active UPID:Proxmox03:000500C0:1ACAC2E1:61CC82EF:qmstart:25510:root@pam: 0 UPID:Proxmox03:00050B18:1ACB80C0:61CC84D5:qmstart:14023:root@pam: 0 UPID:Proxmox03:0005416E:1AD4D69A:61CC9CBB:imgdel:14023@local-lvm:root@pam: 0...

So i noticed over the weekend the locks in seemed to drop so im able to access the VG again, however the machine still shows ? and the tasks are still showing as running but i cant stop them. the VMs are also running as expected. --- Volume group --- VG Name pve System ID...

i did notice that i have this task running. i can see it in the GUI task area. im guessing its related to my lock. im not sure if there is a way to kill it from the cli?

root@Proxmox03:~# lsof | grep "/var/lock/lvm/" root@Proxmox03:~# returns nothing also looked in the lvm lock folder root@Proxmox03:/var/lock/lvm# ls P_global V_pve V_pve:aux

On other host I get the following Name Type Status Total Used Available % local dir active 98559220 12012976 81496696 12.19% local-lvm lvmthin active...

I have the same issue, when i try and search around for the storage device with issue i get a reply of vgdisplay Displays first volumne group. then Giving up waiting for lock. Can't get lock for pve. Cannot process volume group pve the volume group having issues should be the...

i found the issue. the file for wwid did not have th leading and trailing / /

Running Multipath -v3 i get the following wonder if this might be part of the issue? not in wwids file, skipping sde ===== paths list ===== uuid hcil dev dev_t pri dm_st chk_st vend/pro 362cea7f099dce7002850e7f79912a523 0:2:0:0 sda 8:0 1 undef undef...

Yes i have, but i still appear to be stuck. i think the issue might be the all 4 targets share the same wwid, but again the documentation seems straight forward but doesnt quiet work even when it appears to match up.

Nothing it comes back blank which i assume means its configured incorrect or has a bad filter?

Having issues with Multipath configuration. I have A Dell Unity that im connecting to on 4 targets But when i look at my Volume groups i get errors I have the following in my /etc/multipath.conf cat /etc/multipath.conf defaults { polling_interval 2 path_selector...

Glowsome, Any chance you can give an idea of what you were getting for live migrations from 6.4 to 6.4 nodes prior to the upgrade ?

I currently have a cluster of 6 Host, Looking at the PVE 7.0 release (excited good work team) i see there is a path for upgrade from 6.4 which is great. question is however since i have a few nodes and a larger VM count it will take me a while to upgrade a host. and move everything around...

So resolved my issue, never had dhcp setup on the vlan i was tagging

Using Packer 1.7.2 and Proxmox 6.4

Any updates here? Looking to do much the same