Search results

Bump. Am I the only on with this problem??

Greets and Happy belated New Year! I just started having problems with a 4 node cluster running different machines - running latest Proxmox VE version - NEVER had console or terminal issue until just recently (only added a new switch to the network) - now when I open a console from the Proxmox...

I just tested on the same network a stand alone Promox node - and it works without issue (running htop or btop constantly in window) - when I do this with any node in my cluster - the console freezes / hangs - This was not happening in the past ?!?

Greets and Happy belated New Year! I just started having problems with a 4 node cluster running different machines - NEVER had console or terminal issue until just recently (only added a new switch to the network) - now when I open a console from the Proxmox GUI - or start a console with VNC or...

Greets and Happy belated New Year! I just started having problems with a 4 node cluster running different machines - NEVER had console or terminal issue until just recently (only added a new switch to the network) - now when I open a console from the Proxmox GUI - or start a console with VNC or...

I have a similar issue - running latest Firefox on a Mac on Sonoma - funny enough, when I use latest Chrome on same machine it works fine ?!?

Looks like I may have a similar problem - using R86s with 3xi225-LM and 2x10GB Mellanox - running latest Proxmox and OPNSense as VM - OPNSense serving up IPs through DHCP - having issues between VLANs and DHCP broadcast :-( Been racking my brain trying to figure out why certain devices can get a...

Yes - but oddly it changed after I reached the 3rd node for upgrade - odd but now all is well! All 4 nodes are now 8.03 :)

Funny - I have upgraded only one of four nodes so far - but the cluster webpage still shows 7.4 - does this change when all 4 are complete??

Bonus question - should the "main" cluster node be upgraded first?? Thx again!

Is it advisable to shutdown all running VMs and containers before the upgrade? Bonus question - should the "main" cluster node be upgraded first??

OK - funny story - during my investigations - I came across that setup file - then cross checked with another running system which didn't have it - and thought it might be a leftover from the upgrade - so I renamed it to setup.old hoping that would fix it :rolleyes: Now that I have removed it -...

I just checked dhclient.conf - everything is commented out - and I check the other three active nodes running 7.4 - the same. So nothing has changed at all: root@FoxProxMini:/etc/dhcp# cat dhclient.conf # Configuration file for /sbin/dhclient. # # This is a sample configuration file for...

I double checked that - and NO - the interface names are the same as before - but oddly "eth0" seems to appear from somewhere and that's what brings the networking service to a halt :oops:

here are the requested files from that directory

I have the same issue as well - did two nothing special "test" machines to test the upgrade process - went just fine! Then I tried the least important node on a 4 node cluster and it fails to start networking - see attached Not sure where dhclient is getting eth0 from - I don't have an eth0...

Happy belated New Year! I'm trying to get a Mellanox device to recognize a 1Gbe module under latest Proxmox - oddly enough, under "ethtool -m" it sees the device just fine . . . I got a DAC cable on one port and it works fine with a QNAP 2108C switch - but wanted to use the other port with a...

Please be aware of the latest kernel 5.15 serious security flaw: https://www.zdnet.com/article/patch-now-serious-linux-kernel-security-hole-uncovered/ I've been using the Edge kernels since months on several machines without issue - Thankful for the 6.1 release!! :) Happy Holidays!

I have three machines running latest Proxmox 7.2-11 - I use PCI passthrough on one for OPNSense Firewall (passing two NICs) Everything seems to work except I see something strange when I check the IOMMU with "dmesg | grep -e DMAR -e IOMMU" - many "feature inconsistent" messages . . . On one...

Thanks again - I already have my own OPNSense firewall running (on top of ProxMox) using this device: J4125 Quad Core Firewall Pretty cool stuff! The example you sent is not obvious how to add the routing between the nics . . . maybe I'll just try an OPNSense VM and see what happens . . ...