Search results

Hello, when I start the server with network it gets stuck in this status. If I start the server without a network, the system remains stuck at this point for 5-10 minutes and then restarts. After plugging in the NIC, I still cannot reach the system. :-( Thanks for any further help!

Hello, thanks for the quick response. I did, the system also seems to be stuck on the network adapter :-(. =135635&hash=0f4082ef16b5804d8d0434c74d6f105b'] What can I do now? It is not a productive system and only a backup system at another location. But if I update the productive system, it...

Hello everyone, I would also like to add my 5 coins. I have exactly the same problem, with PVE Kernel 6.5 I can no longer boot my Fujitsu S740 (mini PC) system. It just freezes: If I boot the kernel in recovery mode then I can at least boot the system...

Hello everyone, I have just found this entry. Very good, I was able to solve it with two installations. Will this be fixed in the next Proxmox version? Is it a bug? I have now had the problem on two completely independent Debian 12 systems! Thank you!

Hey, no, the key for the ZFS is then located on the RAID1 on the OS partition which must be decrypted during startup e.g. with dropbear works fine! ;) UEFI/EFI Yes, I have exactly the same two questions. Firstly, how do I get the EFI partition onto the second hard disk? It is there but not...

Hey! First of all, thank you very much! I have now carried out the installation accordingly, below is a screenshot of my partitions. NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 1 0B 0 disk sr0 11:0 1 1024M 0 rom nvme1n1...

Hello, I have been reading for quite a while now and trying to gather more knowledge. My current plan is as follows and I would like to know whether it sounds plausible and logical. I would like to install Proxmox on a Debian Live CD and split the partitions as follows: 20 GB (Proxmox OS...

Hey, Yes exactly, I booted from a Debian Live CD via KVM as recommended by you above. Then I created partitions on both NVMEs and put a RAID 1 over both hard disks. All right, I'll check my NVME hard disks right after the installation. Another question: - An installation without encryption...

Hey, okay, I get it. Now I install a Debian Live System and try to prepare the partitions. They should look like you described: 0.5 G EFI, 1 G Boot, 20 G Proxmox System, Rest VMs and Data /var/lib/vz And I would like to create a RAID1 across both disks for the failover of one disk. Finally, I...

Hello, in the meantime I have read up again and installed a test with Proxmox and ZFS. ZFS also offers encryption. Unfortunately, the Proxmox installer does not offer direct encryption during the installation, so I have to adjust the whole thing afterwards. Any experience with ZFS? (The system...

Hey! And thanks again for the quick feedback! ;) Okay, I have now booted my system via Debian Live ISO (yes with KVM/iLO). And I would like to at least try to encrypt the system afterwards. The system has two NVME disks with three partitions each (System, Data and SWAP). Both disks are...

Hi and thanks for your quick feedback! My idea was to encrypt the host as it is operated in an external data center. Of course, only the host has access to the hard disks. It was just the idea to encrypt the system itself. Are the instructions from Javex also intended for encrypting Proxmox...

Hello Javex, perfect your instructions are great. I have a question as follows: I currently have a Proxmox installation (installed by default by the hoster via template). 2 x 960 GB NVME 1st partition 20 GB (Proxmox root /) 2nd partition 960 GB (Proxmox Data /var/lib/vz) 3rd partition 2 GB...

Hello everyone, Has anyone already completely encrypted an existing Proxmox installation? I have installed Proxmox at the hoster via template as follows: 2 x 960 GB NVME Partition 1: 20 GB (Proxmox OS) Partition 2: 950 GB (VMs /var/lib/vz) Partition 3: 2 GB (SWAP) Both hard disks are in...

Hello everyone, I have been thinking about fully encrypting my Proxmox 8 server which is located in an external data center. I would like to use Luks so that the encryption password is requested when booting which I can then enter via SSH. Now I have found the following instructions and have...

Hallo Neobin, ja genau :-( Ich habe jetzt zum Glück noch ein Backup von /etc/pve gehabt. Ist jetzt eingespielt und ich kann Container Starten. Das Interface zeigt jetzt leider nur überall Fragezeichen an. Was kann ich da tun?

Hello everybody! I have the same problem. But I have KVM Session on my OVH Server. I open SSH via Firewall and now I have console. The Problem is /etc/pve is empty I have checked the syslog logs and found this: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at...

Hallo zusammen, nachdem ich die Anleitung für das Upgrade von 7 auf 8 wie beschrieben durchgeführt habe, kann ich meine Oberfläche nicht mehr aufrufen. Schlimmer noch das Verzeichnis /etc/pve ist komplett leer(!). Was kann ich nun tun? Die Logs sagen folgendes: syslog...

Perfekt, es ist gelöst :cool: Danke!

Habe ich gerade probiert. Auch wenn nur 127.0.0.1 drin steht bekomme ich noch den Fehler. Sehr komisch das Ganze. Ich trage zen.spamhaus.org mal im GUI ebenfalls ein. Ich frage mich warum er dann immer noch meint es wäre ein public resolver.