Search results

I did not know, Thanks for the information. but then why I can't excute proxmox-boot-tool status'? do you have an idea about ?

I found this article Proxmox Boot Tool, here is the output of findmnt / : root@dw-srv-p4:/# findmnt / TARGET SOURCE FSTYPE OPTIONS / rpool/ROOT/pve-1 zfs rw,relatime,xattr,noacl root@dw-srv-p4:/# cd /rpool/ROOT/pve-1 root@dw-srv-p4:/rpool/ROOT/pve-1# ls -al total 1 drwxr-xr-x 2...

Here is how the disk partions are: sdg 8:96 0 953.9G 0 disk ├─sdg1 8:97 0 1007K 0 part ├─sdg2 8:98 0 512M 0 part └─sdg3 8:99 0 953.4G 0 part sdh 8:112 0 953.9G 0 disk ├─sdh1 8:113 0 1007K 0 part ├─sdh2 8:114 0 512M 0...

Thanks for your help @Dunuin, When I excute proxmox-boot-tool status it does not work! this what I got, do you know why? # proxmox-boot-tool status Re-executing '/usr/sbin/proxmox-boot-tool' in new private mount namespace.. E: /etc/kernel/proxmox-boot-uuids does not exist. For your...

I don't know if this will help however here is the output of smartctl -a /dev/sdh3 root@dw-srv-p4:~# smartctl -a /dev/sdh3 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.4.128-1-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF...

Hello all, One of the ZFS\rpool disks is DEGRADED due to "too many errors", what is your suggestion on that? Could you please help me with that? Kind regards, Yaseen

I have tried Iperf the PVE as server but I did not get any reply from it in to a windows machine? could you please tell how can we do that?

well, right now I went back to the normal configuration, but I wanted to gather some information then I will try to apply them.

Hello, Recently we got 10G internet connection so we connected our hypervisor to 10G switch ports at the switch level, Server NICs are doing 10G, the Router/Firewall is on 10G and all the cables are Cat 6. However the speed got slower rather than expect! and there are no network speed...

@mira I know it's not related to the ProxMox, Do you see any thing wrong with the bellow mounted points and disks? ?

Know I have not scripted such kind of settings. again thank you so much for your help.

OK I seted to 180 seconds Could you please tell me how can I check if the VM "rollback's a snapshot on start every time?"

Thanks a lot @mira I have seted to 3 so the VM is hosting a webserver and I use a SSL self assigned certificate. whenever the host goes down not the VM I have to regenerate the certificate. so I am wandering if there a kind of setting or a change that made which can initialized the VM when the...

Hello @mira , Thanks for you reply, Could you please tell me how do we make the boot delay? I have another problem in this VM whenever the host goes down. the self assigned certificate on that VM changes, could it be related? Thanks

Hello I have a PVE node which has the bellow list of pools and the relevant disks: root@dw-srv-p4:~# zfs list NAME USED AVAIL REFER MOUNTPOINT hddpool 5.04T 3.38T 153K /hddpool...

@fabian I believe you but sometime it's good to go to up to the end, what about of using a solution like OVH or backblaze services?

I wanted to give a try since @oguz recommended to see at least where it goes. but I am having some error as before with rclone, when I try to create the datastore which is: unable to create chunk store 'rclonetest' subdir "/mnt/GCSBucket/.chunks" - EIO: I/O error he told me that I should read...

Hello @oguz Do you think If I go back to rclone, I will face same problem? or it's something you have already tested?

SAD, It would a great to make this work I think :( I hope one day soon.

What about Azure or AWS do you know if they are supporting all what PBS needs? I'll have a look of having secondary PBS somewhere else if possible.