Search results

Hi all , So i am think this a problem with DOCA-OFED drivers which has some dependecies and recompiled parts that cifs needs. So this error if modeprove -v cifs modprobe: DEBUG: ../libkmod/libkmod-module.c:1461 kmod_module_get_options() modname=snd_via82xx_modem mod->name=cifs mod->alias=(null)...

Sorry it's a Mesh config I have Dual 2x100G but no switch. Which is ok for me. I have also 6x10Gb/s (Also no switch for this) maybe move ceph public network there but I think It would be probably slower ? What do you think ?

Hi Have similar setup with 3 node MESH Configuration. AMD EPYC 7543P 32-Core Processor 512GB ram I have only 2 X 7TB 7450 PRO MTFDKCB7T6TFR per node for now. I did the FRR setup on 100Gbps test with Iperf goes about 96Gbps. NVME goes about with fio --ioengine=libaio...

I quite shure i got fried brain from compiling kernel drivers. Thank you so much I completely overlooked I am not using a switch . Thank you. Thank you Waltar . Sometime you need a just a small push from good people. thx man so much. Anyway is is some is trying to work with lates promox and this...

I think the firewall rules and automate with lot of scripting are only thing you can do.

Hi I am trying to setup ConnectX5 cards. in Mesh config using DAC cables ┌───────────┐ │ Node1 │ ├─────┬─────┤ │enp197s0f0np0│enp197s0f1np1│ └──┬──┴──┬──┘...

I hope this saves someone time should be in the documentation for windows when creating virtual machines or default when selecting windows. Thank you very much for responding @Alwin

You are correct the question is why is such diffrence ? Also if you make a mistake not easy to change.

So basically I got poor performance on qcow2 and then tried to install raw which fixed the problem but no snapshots and other neat features of qcow2 so basically. But again I run into problems it looks like that the install of windows server must be done right. Storage driver makes major...

Hi Guys, We are interesting in creating large scale installation of proxmox. The system is on the same location so the nodes and cluster filesystem bond with 10G networks switches, we are think using 100G. Basic idea: Create 3+ node proxmox cluster 10G link to shared storage FS Create...

Hi gvalverde, I will write you a guide ASAP ok. For now I would say it works ok very satisfied.

Hi Guys, Thank you for your answers I did setup exactly as @gkovacs said makes most sense to me. Here is some benchmarks I did maybe some can use it as reference. Slow Storage Randr 75% Read ZIL + L2ARC fio --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test6 --filename=test7...

Hi MIr, ZIL is mirrored 2 x 50 I wrote RAID 1 ZIL NVME SSD 50 GB RAID 1 <--- maybe I was not clear

Well that was the question. I thought that ZFS would not benefit much from NVME but was not sure , Mostly we run a lot of small docker about 50+ 768M per docker they small in memory and do not have big data IO usage only some peaks than we would need High IO to finish as fast as possible with...

@Lnxbill tnx for the reply. Well we are thing of testing this in detail but. For now probably about 32GB - to 48 GB MAX for ZFS, Unfortunately we can not use LXC but we need a dockers inside VM's So we have two options doing raid 1 nvme more intensive apps run on NVME or try to balance speed...

Hi People, We would like to move are KVM host to Proxmox single server on OVH. But we are wondering what FileSystem should we setup as primary: This the server configuration: Intel Xeon E5-1650v3 - 6c/12t - 3.5 GHz/3.8 GHz RAM: 128GB DDR4 ECC 2133 MHz 2X2TB SATA + 2x450 GB NVME SSD Our...