Search results

Okay.. i already have a physical NIC for the Internet connection. I should configure the ip addressing on the physical one or in te vmbrX? If i try to configure vmbr1 (vmbr0) is already used and i set the gateway of the device that is a bridge to the internet i get this error: Parameter...

Hi guys, Also thanks to all of us i'm going to keep all my system live.. I need an help regarding network configuration and NIC creation I created 3 proxmox virtual server with 2 NIC, one NIC will be used for internal management (Private ip) and second NIC will be used as Public inteface...

Solved. Reaload state of mind. :D

i just changed the resolv.c i'm going to try... Anyway just you to know i changed the /etc/resolv.conf and i put my internal DNS webserver...

Guys, here i am again :D after some network troubleshooting i needed to reload network and server itself. After that i lost all my cluster, i have 3 server currently they are unable to see eachothers... i tried to reload every things... service pve-cluster restart <--- Nothing changed...

Thanks. Solved. I will use the internal DNS. Antonino

root@Server1:~# ping 10.216.110.108 <------ Local DNS PING 10.216.110.108 (10.216.110.108) 56(84) bytes of data. 64 bytes from 10.216.110.108: icmp_seq=1 ttl=127 time=2.54 ms 64 bytes from 10.216.110.108: icmp_seq=2 ttl=127 time=1.24 ms 64 bytes from 10.216.110.108: icmp_seq=3 ttl=127...

Any suggestions?

Yes, reboot was done. root@Server1:~# dig google.it ; <<>> DiG 9.10.3-P4-Debian <<>> google.it ;; global options: +cmd ;; connection timed out; no servers could be reached root@Server1:~# dig @8.8.8.8 google.it ; <<>> DiG 9.10.3-P4-Debian <<>> @8.8.8.8 google.it ; (1 server found) ;; global...

Hi guys,, currently i have a problem with all of my server: I can ping public IP adress but i'm not able to ping their hostname. ping 8.8.8.8 is OK ping Google.it is NOT OK. my resolv.conf : root@Server1:/etc# more resolv.conf search proxmox nameserver 8.8.8.8 nameserver 8.8.4.4 nameserver...

Hi guys, i'm going to use FreeBSD as a shared storage in order to configure HA between 3 servers. does anyone has a guide in order to understand how to set FreeBSD and create a iSCSI target? Thanks. Anto

Thanks :)

Hi guys, I have 3 virtual servers, after i edited the /etc/hosts file i'm not able to ping the hostname of the other servers on the cluster but i can ping the IP address. root@Server1:~# more /etc/hosts Server1 192.168.100.11 Server2 192.168.100.12 127.0.0.1 localhost Server3 192.168.100.13...

Solved, everything start automatically. Temporary problem on the network, the server weren't able to ping each other. Thanks

Hi guys, after a reboot needed to test my HA, i lost all the nodes... why? There's some command in order to keep them up again? root@Server1:~# pvecm status Quorum information ------------------ Date: Thu Jul 20 15:31:20 2017 Quorum provider: corosync_votequorum Nodes...

Hi, i'm using an HP server as storage with about 100Gb Raid tecnology. Now everithing is fine and the installation on the VM is okay, i changed the way proxmox is writing to the remote storage. :) I've another question... to test the HA should i switch off let's say Server1 and i automatically...

Do you mean between the servers? No. Maybe i can stop the firewall service on the servers itself?

Hi guys, i've 3 server (3 nodes), i build up also a Shared Storage and i'm able to connect via proxmox to it. In order to use HighAvaibility, when i'm going to create a VM i should install it using the Shared Storage HD? Then add the VM to the High Avaibility? Because when i do it, the...

Hi team... I have some problem with my shared storage, i have 3 nodes attached to a cluster server and a shared storage server attached to the same switch. As you can see, i'm able to use the shared storage from Server1 but not from server 2 and 3. See the attached images... First image is...

Solved. Problem was on the FreeNas configuration. Thanks