Search results for query: wifi

I installed an openwrt-VM that manages all the network's WAN by passing through the wifi-card and the usb-device that usually provides internet. The upside of this setting is, that openwrt as a router/ gateway also handles all the network settings of VMs and LXC, the proxmox host's IP and...

If the Router doesn't understand VLANs, then Router's traffic will default on the default untagged VLAN (Default ID: 1). You can configure the untagged VID in Proxmox for the NIC, or add another Virtual NIC and set that as untagged instead.

Hello, thank you for your suggestions! I know it has been a long time since I have checked this post, but would my wifi router also need to support vlans? I read that even if the server side and switch ports are configured, unless the router understand vlan technology, it will not work. Is that...

...Windows: that has a wild assortment of hardware and as far as I can tell the 7* kernel gets stuck (just stops...) booting with a Mediatek WiFi adapter or rather the Bluetooth part of that, sticking with the 6* kernel avoids that: stability of a non-micro-kernel OS still rests with its...

...to get it working and I'm bit lost. Thank you in advance! Config & Setup: CPU: Intel Core Ultra 7 270K Plus Motherboard: MSI Z890 MAG Tomahawk WiFi (Bios: 7E32v1AB1) - SR-VIO & Resizable Bar enabled uname -a Linux pve-white 7.0.2-2-pve #1 SMP PREEMPT_DYNAMIC PMX 7.0.2-2...

...thing I did was installed the B50 into a Windows computer and performed all firmware updates (done on a computer with a Gigabyte B550M Gaming X WIFI). When I install the B50 into my Proxmox server things get very weird. I have tried this on all three kernels I have available on my machine...

...the driver loaded. Changed nothing. /etc/modprobe.d/xe.conf options xe xe_sriov_auto_provisioning=0 Has anyone had better luck? If there is more info needed I'll happily add it in here. Current system is: Asus B550M Plus wifi II R9 5900XT 64GB@3200MHz Arc Pro B70 ProxmoxVE 9.1 with...

...(enterprise) SSD's (the Dell has space for an additional 2,5 SATA SSD but I think with an A+E Adapter I can connect another SATA or M.2 to the Wifi Card slot). Would it be advisable to get 1 SATA and 1 M.2 or 2 SATA? What would the optimal setup look like regarding on which SSD to install...

...qm1d1c0042 drm_exec snd_seq_device drm_suballoc_helper cmdlinepart ttm processor_thermal_device ghash_clmulni_intel iwlwifi processor_thermal_wt_hint tc90522 aesni_intel drm_display_helper platform_temperature_control spi_nor snd_pcm rapl processor_thermal_soc_slider earth_pt3...

...laptops) and I wanted to share a script that automates the most common hurdles. Since Proxmox doesn't natively support bridging over WiFi, I created a solution that uses NetworkManager for WiFi management and IPTables NAT to provide internet to VMs via a dedicated bridge (vmbr1). What this...

Thanks for the info. Yes, i tried to do a bios flashback yesterday. It was like working i guess. The only led the m/b has is in the flashback button. When i pressed it, it will blink 5 times and then stays on. According to the manual it was a malfunction and i should try again. Tried several...

Just some points on your warranty: 1. Your M/B wasn't working prior to flashing. 2. The fact that the BIOS bricked the M/B (no image at all) is almost certainly a consequence of point 1 above. 3. Even if it was working before, & you performed a regular BIOS update (using an official...

DDR5 yes, that was a typo. Im actually on the middle of a bios update. The linux install goes with kernel panic too. It will be bad if I have something not working right since its brand new. Can happen but it really sucks. PC rebooted after bios update and no video right now. I just hope, i...

Looking at this site - it appears that the B840M-A WIFI M/B uses DDR5 & not DDR4. These are NOT interchangeable. So firstly - you need to perform a complete HW test - including testing ALL the RAM , CPU & the various disks. Also I would update the BIOS to the latest available. (Looks like...

Hi everyone, im kinda newby with this and I hope I can get some clarification. I have a brand new pc. Ryzen 9 9950x Asus prime B840M-A WIFI 64gb DDR4 (16x4) 1ssd 240 2x 1TB SSD kingston datacenter I downloaded proxmox 9.1 and tried to install it. I get multiple errors. Past the "Loading...

...efidisk0: local-lvm:vm-201-disk-0,efitype=4m,ms-cert=2023w,pre-enrolled-keys=1,size=4M hostpci0: mapping=gpu,pcie=1,x-vga=1 hostpci2: mapping=wifi ide0: none,media=cdrom kvm: 1 localtime: 1 machine: pc-q35-10.1 memory: 24576 meta: creation-qemu=10.1.2,ctime=1774779764 name: Windows11 net0...

I there a way of managing internet in one place (wifi, ethernet, usb-tethering) ? Wifi: With cinnamon's network-manager I can configure wifi. Inside interfaces I can give vmbr0 internet access via NAT. USB-Tethering: With cinnamon's network-manager I can configure usb-Tethering. But how to...

Hi, Then the issue is with avahi on the laptops. Please double check if avahi binds to proper interface because laptops usually have both wifi and wired ethernet.

...now. i was reading on internet and i see some issues (No Fix) with Asus Z790-E My Computer Info Motherboard: Asus Rog Strix Z790-E Gaming Wifi CPU: Intel Core i9 14900K RAM: 98GB DDR5 GPU: Nvidia RTX4090 Storage: 1 SSD NVME Kingston Fury Renegade 1TB (DEAD NOW) 1 SSD NVME Kingston Fury...

...[ 5] 0.00-10.00 sec 22.7 GBytes 19.5 Gbits/sec receiver iperf Done. iperf from the node to my desktop (upstairs, using Wifi) is pretty good too (500 Mb/s). It started yesterday but I don't think (I'm sometimes wary of my memory) I've done anything to the Proxmox...