Search results

Hi! How did you setup the cloud init VM? Usually, cloud init VMs are expected to be used over a serial interface instead of a graphical display. Usually this is done by setting kernel parameters, e.g. providing the console parameter to the kernel. You can see the current kernel parameters in...

Hi! Thanks for reaching out, there's another user that seems to have similar problems [0]. It would be helpful to have more information, could you provide a boot log for the system? Does the NIC have the most recent firmware on it? [0] https://forum.proxmox.com/threads/167132/

Yes, some boot logs would be great to further investigate here what the problem is, so dmesg/journalctl, and optionally a lspci and ethtool output would be great. On another note, have you tried to upgrade the firmware for the BCM57416?

How did you make sure that the change did not take effect on the container? The container shares the host's kernel, so if the sysctl config has been set there, it is also set for the container. Either way, aren't there better defenses for these attacks then enlarging the receive buffer?

Hi! Does the error occur also for the first restart after the installation? The current ISO image does only ship the 6.8 kernel and as it's not a network installer, it is only designed to install packages which are shipped with the ISO image and doesn't have knowledge about other available...

FYI this can of course be any vmid, which isn't taken yet by another guest, so calling /cluster/nextid is what the web interface would also do to get the next free vmid when the Create Wizard is opened.

The error you described above should only happen if the bridge wasn't specified at all and the SDN is enabled. Could you try again with encoding the parameters in the URL?

Hi! Could you provide the complete API call that you make to the create_vm API endpoint? I suspect that the SDN is configured and one of the net* options is either malformed and therefore doesn't provide a correct bridge/vnet, but the whole API call provides more information to investigate here.

Hi! Are there any messages relevant to this in the syslog? Are there any errors when you open the Dev Tools (F12) when you're on one of the WebGUI in the browser? Have you tried restarting both the API server and its proxy (systemctl restart pvedaemon pveproxy)?

Hi! Yes, there is and the one you found is also the correct one! Suppose I want to import the virtual machine with the name TestVM from the ESXi storage esxistore to Proxmox VE on the local storage with vmid 404, then the command would need to be: qm import 404...

Hi! Another user posted that they fixed their problem by upgrading and resetting the BIOS settings to default [0]. On another note, I just want to point out that the Intel 13th and 14th 700 and 900 are affected by a hardware bug, which causes them to self-destroy by over-voltage of cores in...

Hi! You can add hook scripts to individual virtual machines [0], where the script then makes a request to the web hook target. [0] https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_hookscripts

Hi! The Proxmox VE installer is only capable of setting up a bridged network on the host with the management NIC as the bridge port. Any other network configurations have to be made manually afterwards, but this could be automated by running a first-boot script, which modifies the network...

Welcome to the Proxmox forum, Albertus! Thanks for using the Proxmox Datacenter Manager! Please open a feature enhancement request for this on our Bugzilla [0] as it's much easier to track and find there than in the community forum. As far as I could see there was no entry for this yet, but...

Hi! It seems like that the other node was not setup correctly when joining them. What is the output of pvecm status on node1? Is there anything significant in the syslog when joining the nodes? Is there any firewall setup between the nodes? What is the content of /etc/corosync/corosync.conf?

Hi! There are no granular privileges and ACL paths to manage these on a guest-level basis. There is a similar feature request for this in our Bugzilla [0], where you can subscribe to the ticket. I would also recommend you to chime in and explain your use case in detail there, so that it can be...

Welcome to the Proxmox forum, osteth! Have you reloaded your network after the change (e.g. systemctl restart networking)? Could you share your network configuration in /etc/network/interfaces? How is the networking setup for one of your VMs/containers?

Hi! In general, the HA Manager is currently capable of managing the high availability of resources within a cluster. The underlying key technology for a Proxmox VE cluster is corosync, which in itself needs a low latency of under 5 milliseconds [0], which is usually achievable with a separate...

What is the output of echo $DBUS_SESSION_BUS_ADDRESS and echo $XDG_RUNTIME_DIR for that user? If those are directories, what are their permissions and do you have read/write access?

Hm, I wonder why it worked before. Have you used it as the container's root user or as a separate user with that command? For the former it shouldn't work as the root user doesn't have its own user service manager.