Search results

I just hit this error moving an EFI disk belonging to my home assistant qemu VM from local-lvm to a nvme ssd (that is a local-lvm-thin). Once I halted the VM I was able to move it. Running 7.2-3, everything up to date (I Just installed it last night). Here is the VM config: # cat 112.conf...

Yes, I did. Infact on first boot I got an error about secure boot being enabled, so I went into the bios and disabled it. I also tried manually targeting the bootloader to no avail.

I just hit this very same issue. I was trying to connect a SMB share from my Synolgy to my Proxmox. Unfortunately, it didn't work and I had no choice but to give up. I'm now using NFS.

My current proxmox "server" is a very old i7-4770k, 32G and a z87-c motherboard. The system is running latest proxmox 7.2-3, full up to date as of posting and boots in UEFI mode (but no secure boot). The "boot" volume is a 2.5" 60GB SATA SSD, and the server has a 2 TB NVMe drive which is used...

As in title. I setup a 2nd server in my lab to do testing, it only has a "local-lvm" storage. I setup some VMs on it. Now that I'm done testing - I'm decommissioning it and I need to move all my VMs off from this test server and onto my main one. But when I go to migrate powered off VMs, I...

Great, got it - thanks.

So last night I changed the root password on both my proxmox host server & my proxmox backup server. The new password works fine to log into ssh/webGUI etc of both systems. I deleted all historical backups, then removed the proxmox backup server storage from my proxmox (starting fresh)...

Hello Everyone I've been wrestling with this all day, hoping someone can help. I have my iGPU onboard GPU passed through to a vm running windows 10 build 2004. Qemu utils are installed on this system. It's using OVMF bios (UEFI). I used the instructions in the documentation to set this up...

Hi Alwin, as below # ceph versions { "mon": { "ceph version 12.2.12 (39cfebf25a7011204a9876d2950e4b28aba66d11) luminous (stable)": 1, "ceph version 12.2.13 (98af9a6b9a46b2d562a0de4b09263d70aeb1c9dd) luminous (stable)": 2 }, "mgr": { "ceph version 12.2.12...

That is not my problem. I have size 3 min 2. pool 9 'ceph_hdd' replicated size 3 min_size 2 crush_rule 1 object_hash rjenkins pg_num 512 pgp_num 512 last_change 10523 flags hashpspool stripe_width 0 application rbd removed_snaps [1~3,9~4,f~114,124~14] pool 20 'ceph_pci_SSD' replicated...

Output of commands below. the ceph osd crush rule dump shows 3 rules total, but the first (default one that was "included" when ceph was set up) isn't in use anymore. # ceph osd df tree ID CLASS WEIGHT REWEIGHT SIZE USE AVAIL %USE VAR PGS TYPE NAME -1 86.25343 -...

Hi There, We've got a 5-node ceph cluster with 10gbps networking. All hosts have 3 x HDDs in them for "slow" storage, and all hosts but 3 have SSDs in them for fast storage. Hosts 1,2,3,4,5 all have 3 x HDDs in them - we used this for anything that needs "Slow" storage. Hosts 1,2,4,5 all have...

Hi Alwin - I see what you mean now. I updated the rule by doing a ceph osd pool set ceph_ssd crush_rule replicated-ssd as per the documentation. The output of ceph osd dump now shows that the ssd pool is using rule id 2 - I was expecting this to trigger a rebalance of some sort, but it...

@Alwyn - I just ran ceph pg ls-by-pool <my pool name> And I checked the up, primary and acting columns - these all reference the OSDs that host the pool, and they're all our OSDs. Am I missing something? Looks correct to me

Hi Alwin, Could you please point out how you arrived at that conclusion? As per post #5, I created the ceph pool with this command ceph osd crush rule create-replicated replicated-ssd default host ssd and then by adding the ssds pveceph osd create /dev/<devicename> Then creating a pool...

And my ceph topology: # ceph osd dump epoch 3675 fsid 5524ca13-287b-46aa-a302-9b1853a5fb25 created 2018-03-17 17:03:08.615625 modified 2020-06-08 15:53:13.325398 flags sortbitwise,recovery_deletes,purged_snapdirs crush_version 145 full_ratio 0.95 backfillfull_ratio 0.9 nearfull_ratio 0.85...

And iperf tests on the cluster Server listening on TCP port 5001 Binding to local address 10.10.10.5 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 10.10.10.5 port 5001 connected with 10.10.10.1 port 40912 [ ID] Interval...

Hi, so I finally got around to doing this. Unfortunately, performance is not as good as I'd expect it to be, especially in synthetic benchmarks: This is the new SSD pool (it is comprised of 4 x 1.2 TiB FusionIO devices that in my testing can easily deliver tens of thousands of IOPS and 500+...

Ok - I think I've got it. Just tested it in my lab. If this looks ok @Alwin could you mark as solution. First, I created a new ceph replication rule (The default one is simply called "replicated_rule"), and classify it for HDDs only: ceph osd crush rule create-replicated replicated-hdd default...

Hi @Alwin yes, that looks exactly like what I need. I just went over that doc. The doc says Perfect - a new SSD-only pool is exactly what I'm after. So to make this work I need to create a new rule, like so: ceph osd crush rule create-replicated replicated-ssd default-ssd host ssd That will...